DataSheetWiki


ATS266 fiches techniques PDF

ETC - High Voltage Hall Effect Latch

Numéro de référence ATS266
Description High Voltage Hall Effect Latch
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





ATS266 fiche technique
High Voltage Hall Effect Latch
ATS266
„ Features
- On-chip Hall plate
- Operating voltage: 4V~28V
- Output current: 400mA(Continuous)
- Reverse protection diode only for chip reverse
power connecting (Note)
- Output protection Zener breakdown Vz=56V(Typ)
- Package: SIP-4L
(Note)
Protection diode only exists at power pin(1,4) output, not
including pin (2,3).
„ Application
- Dual-coil Brush-less DC Motor
- Dual-coil Brush-less DC Fan
- Revolution Counting
- Speed Measurement
„ Pin Assignment
„ General Description
ATS266 is an integrated Hall sensor with output
drivers designed for electronic commutation of
brush-less DC motor applications. The device
includes an on-chip Hall voltage generator for
magnetic sensing, a comparator that amplifies the
Hall voltage, and a Schmitt trigger to provide
switching hysteresis for noise rejection, and
complementary darlington open-collector drivers for
sinking large current loads. An internal bandgap
regulator is used to provide temperature
compensated supply voltage for internal circuits and
allows a wide operating supply range.
If a magnetic flux density (B) is larger than operate
point (Bop), DO turn on (low) and DOB turn off
(high). The outputs state is latched prior to release
point (Brp) coming. if B< Brp, DO turn off and DOB
turn on. ATS266 is rated for operation over
temperature range from -20oC to 85 oC and voltage
range from 4.0V to 28V. The devices are available
in low cost die forms or rugged 4 pin SIP packages.
„ Pin Configuration
4. GND
3. DOB
2. DO
1. VCC
„ Ordering Information
Name
VCC
DO
DOB
GND
ATS266 X - X X X - X
Description
Positive Power Supply
Output Pin
Output Pin
Ground
Wafer Body
Blank or
A~Z : if necessary
to specify
Package
P: SIP-4L
Lead
L : Lead Free
Blank: Normal
Packing
Blank : Tube
A : Taping
Magnetic
Characteristics
A or B
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. A5 Mar 17, 2003
1/6

PagesPages 6
Télécharger [ ATS266 ]


Fiche technique recommandé

No Description détaillée Fabricant
ATS266 High Voltage Hall Effect Latch ETC
ETC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche