DataSheetWiki


7314 fiches techniques PDF

LSI Computer Systems - AC POWER CONTROLLERS

Numéro de référence 7314
Description AC POWER CONTROLLERS
Fabricant LSI Computer Systems 
Logo LSI Computer Systems 





1 Page

No Preview Available !





7314 fiche technique
LSI/CSI
LS7314-7315
U® L LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747 (631) 271-0400 FAX (631) 271-0405
A3800
AC POWER CONTROLLERS
FEATURES:
10 I/Os to Select/Indicate up to ten Power Levels
Inputs activated by Touch or Pushbutton Switch
Output switches pure and precise AC Power to Load
Operates with 50Hz/60Hz line frequency
Rugged, latchup-free process technology
+10V to +14V operation (Vss-VDD)
LS7314, LS7315 (DIP;
LS7314-S, LS7315-S (SOIC) - See Figure 1
APPLICATIONS:
• Universal and shaded-pole motor speed control for modern
appliance designs. Eliminates awkward mechanical switch
assemblies and multi-tapped motor windings. (See Fig. 4C)
• Multi-level light switches. (See Fig. 4D)
CONNECTION DIAGRAM - TOP VIEW
PL3 1
PL4 2
PL5 3
PL6 4
PL7 5
PL8 6
PL9 7
PL10 8
16 PL2
15 PL1
14 Vss (+V)
13 TRIG
12 SYNC
11 CAP
10 OFF
9 V DD (-V)
FIGURE 1
A
DESCRIPTION:
The LS7314 - LS7315 are MOS integrated circuits specifically
designed for appliance motor speed control, lighting control,
etc. I/Os (PLs) are provided for selecting/indicating from one to
ten power levels. The LS7315 is designed for pushbutton con-
trol. The LS7314 is designed for touch control. (See Figures 4A
and 4B)
INPUT/OUTPUT DESCRIPTION:
PL1-PL10 (Pins 1-8, 15, 16)
Ten inputs/outputs for selecting ten output phase angles (pow-
er levels). When no power level is selected (such as after sys-
tem power-up) PL1-PL10 all act as inputs. When a power level
is selected by applying a logic zero at one of these inputs for
TH time (See Dynamic Characteristics), the output (TRIG) is
turned on at the phase angle selected and the PL input switch-
es status to become an output in order to drive a display, such
as an LED. It switches back to the input state when another PL
input is activated or when OFF is selected. (See Note 1)
TRIG (Pin 13)
This output is designed to drive a triac in series with the
load and control its firing angle with respect to the AC line.
A 1ms output pulse width is provided to enable the triac to
fire even with inductive loads which cause significant phase
delays between voltage and current.
Vss (Pin 14)
Supply voltage positive terminal.
VDD (Pin 9)
Supply voltage negative terminal (ground).
NOTE 1: LS7315 has an internal pullup resistor on this in-
put and LS7314 does not. (See DC Electrical Character-
istics.)
FIGURE 2. TRIG PHASE ANGLE Ø
OFF (Pin 10)
If TRIG is on, a logic 0 applied to the OFF input for TH time
turns TRIG output off and switches the selected PL back to the
input state. If TRIG is off, activating OFF leaves the circuit un-
affected. Following an OFF activation, TRIG can be turned on
by applying any PL input. (See Note 1)
SYNC (Pin 12)
Input for PLL reference frequency (50Hz/60Hz). All internal
clock frequencies are synchronized with the SYNC input.
CAP (Pin 11)
Input for component connection for the PLL filter capacitor.
7314-040197-1
SYNC
TRIG
Ø
TW

PagesPages 4
Télécharger [ 7314 ]


Fiche technique recommandé

No Description détaillée Fabricant
731-1A-xxxx-xx-xxx Automotive Power Relay OEN
OEN
731-1C-xxxx-xx-xxx Automotive Power Relay OEN
OEN
73120 N-Channel 25-V (D-S) MOSFET Vishay Siliconix
Vishay Siliconix
7314 DIGITAL CONTROLLED AUDIO PROCESSOR WITH LOUDNESS STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche