DataSheetWiki


OPB608V fiches techniques PDF

ETC - Reflective Object Sensor

Numéro de référence OPB608V
Description Reflective Object Sensor
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





OPB608V fiche technique
Reflective Object Sensor
OPB608A/B/C, OPB608R, OPB608V
Phototransistor Output
Unfocused for sensing diffuse surface
Low Cost Plastic Housing
Enhanced signal to noise ratio
Reduced ambient light sensitivity
Optek Technology
The OPB608 is a reflective switch that consist of an infrared emitting device (LED or VCSEL) and an NPN silicon phototransistor mounted
“side-by-side” on a parallel axis in a black opaque plastic housing. Both the emitting device and phototransistor are encapsulated in a visible
filtering epoxy except the OPB608R. The phototransistor responds to radiation from the emitter only when a reflective object passes within its
field of view. The phototransistor has enhanced low current roll off to improve the contrast ratio and immunity to background irradiance. The
LED versions are designed for near field applications with the VCSEL version being designed for longer distances.
The OPB608A/B/C devices are designed for applications with reflective distances between 0.050” and 0.375” and when the light pattern is not
to be seen by the human eye except for the OPB608R. By utilizing the night enhancement function of a camera, the near infrared light pattern
can be seen. This allows the user to see the pattern shining on the reflective object.
The OPB608R device is designed for applications with reflective distances between 0.050” and 0.300” and when the light pattern is to be seen
by the human eye. The efficiency of the sensor is lower for optical wavelengths in the visible range thus reducing the distance that can be
used.
The OPB608V device is designed for applications with reflective distances between 0.050” and 1.5” and when the light pattern is not to be seen
by the human eye. By utilizing the night enhancement function of a camera, the near infrared light pattern can be seen. This allows the user to
see the pattern shining on the reflective object.
Reflective distances are dependent upon the drive current for the light emitting device, the wavelength of the light source, and the type of re-
flective material, therefore each application should be checked for the ability to meet each application.
Ordering Information
OPB608A—880nm LED, IC(ON) 2.0 mA min.
OPB608B—880nm LED, IC(ON) 1.0 mA min, 4.0 mA max.
OPB608C—880nm LED, IC(ON) 0.5 mA min
OPB608R—660nm LED, IC(ON) 1.0 mA min, 6.0 mA max.
OPB608V—850nm VCSEL, IC(ON) 5.0 mA min.
Additional laser safety information can be found
on the Optek website. See application #221.
Classification is not marked on the device due to
space limitations. See package outline for
centerline of optical radiance. Operating de-
vices beyond maximum rating may cause de-
vices to exceed rated classification
Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 [email protected] www.optekinc.com
A subsidiary of
TT electronics plc
Issue A 06.04

PagesPages 9
Télécharger [ OPB608V ]


Fiche technique recommandé

No Description détaillée Fabricant
OPB608 Reflective Object Sensor ETC
ETC
OPB608A REFLECTIVE OBJECT SENSORS ETC
ETC
OPB608A REFLECTIVE OBJECT SENSORS ETC
ETC
OPB608A Reflective Object Sensor ETC
ETC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche