|
|
PDF TUA2009XS Data sheet ( Hoja de datos )
| Número de pieza | TUA2009XS | |
| Descripción | VHF I / VHF II / UHF-Tuner IC | |
| Fabricantes | Siemens Semiconductor Group | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TUA2009XS (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
VHF I / VHF II / UHF-Tuner IC
Preliminary Data
TUA 2009X
TUA 2009XS
Bipolar IC
Features
q Few external components
q Frequency and amplitude-stable unbalanced
oscillator for the VHF I-frequency range
q Frequency and amplitude-stable balanced oscillators for the
VHF II- and UHF-frequency range
q Optimum decoupling of input frequency from oscillator
q Double balanced mixer with wide dynamic range and high-
impedance inputs for the VHF I-frequency range
q Double balanced mixer with wide dynamic range and low-
impedance inputs for the VHF II- and
UHF-frequency range
q Low-impedance SAW-filter driver output
q SAW-filter driver with high signal-handling capability
q Internal band switch
q Low-noise, internal reference voltage
q Integrated 1st IF-bandpass filter
P-DSO-24-1
P-SSOP-24-1
Type
TUA 2009X
TUA 2009X
TUA 2009XS
Ordering Code
Q67000-A5113
Q67006-A5113
Q67006-A5202
Package
P-DSO-24-1 (SMD)
P-DSO-24-1 Tape & Reel
P-SSOP-24-1 Tape & Reel
Circuit Description
This integrated circuit permits the design of TV-tuners covering the entire frequency range from
48 … 900 MHz split into 3 frequency bands. The application is suitable for all tuners in TV- and
VCR-sets.
The integrated circuit includes 3 balanced mixers (double balanced mixer/ring mixer), one
unbalanced oscillator for VHF I and two balanced oscillators for VHF II and UHF, a SAW-filter driver
amplifier as well as a reference voltage source and a band switch. Filters between tuner input and
IC separate the TV-frequency signal into three bands. The band switch ensures that only one band
at a time is activated. In the activated band the signal passes a frontend stage with MOSFET-
amplifier, a double-tuned bandpass filter and is then fed to the balanced mixer input of the IC which
is a high-impedance stage for the VHF I-range and a low-impedance stage for the VHF II- and UHF-
range, respectively. The input signal is mixed there with the oscillator signal from the activated
oscillator section and fed into common IF-stage for all bands. The IF-signal is further amplified in a
SAW-filter driver section in order to drive the SAW-filter with a low impedance.
Semiconductor Group
1
12.94
1 page  
TUA 2009X
TUA 2009XS
Block Diagram
Semiconductor Group
5
5 Page 
TUA 2009X
TUA 2009XS
Test Circuit 1
Semiconductor Group
11
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet TUA2009XS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TUA2009X | VHF I / VHF II / UHF-Tuner IC | Siemens Semiconductor Group |
| TUA2009XS | VHF I / VHF II / UHF-Tuner IC | Siemens Semiconductor Group |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |