|
|
Numéro de référence | TS68882DESC03XA | ||
Description | CMOS Enhanced Floating-point Co-processor | ||
Fabricant | ATMEL Corporation | ||
Logo | |||
Features
• Eight General-purpose Floating-point Data Registers, Each Supporting a Full 80-bit
Extended Precision Real Data Format (a 64-bit Mantissa Plus a Sign Bit, and a 15-bit
Signed Exponent)
• A 67-bit Arithmetic Unit to Allow Very Fast Calculations with Intermediate are Precision
Greater than the Extended Precision Format
• A 67-bit Barrel Shifter for High-speed Shifting Operations (for Normalizing etc.)
• Special-purpose Hardware for High-speed Conversion Between Single, Double, and
Extended Formats and the Internal Extended Format
• An Independent State Machine to Control Main Processor Communication for
Pipelined Instruction Processing
• Forty-six Instructions, Including 35 Arithmetic Operations
• Full Conformation to the IEEE 754 Standard, Including All Requirements and
Suggestions
• Support of Functions Not Defined by the IEEE Standard, Including a Full Set of
Trigonometric and Transcendental Functions
• Seven Data Type Types: Byte, Word and Long Integers; Single, Double, and Extended
Precision Real Numbers; and Packed Binary Coded Decimal String Real Numbers
• Twenty-two Constants Available In The On-chip ROM, Including π, e, and Powers of 10
• Virtual Memory/Machine Operations
• Efficient Mechanisms for Procedure Calls, Context Switches, and Interrupt Handling
• Fully Concurrent Instruction Execution with the Main Processor
• Fully Concurrent Instruction Execution of Multiple Floating-point Instructions
• Use with any Host Processor, on an 8-, 16- or 32-bit Data Bus
• Available in 16.67, 20, 25 and 33 MHz for Tc from -55°C to +125°C
• VCC = 5V ± 10%
Description
The TS68882 enhanced floating-point co-processor is a full implementation of the
IEEE Standard for Binary Floating-Point Arithmetic (754) for use with the THOMSON
TS68000 Family of microprocessors. It is a pin and software compatible upgrade of
the TS68881 with optimized MPU interface that provides over 1.5 times the perfor-
mance of the TS68881. It is implemented using VLSI technology to give systems
designers the highest possible functionality in a physically small device.
Intended primarily for use as a co-processor to the TS68020/68030 32-bit micropro-
cessor units (MPUs), the TS68882 provides a logical extension to the main MPU
integer data processing capabilities. It does this by providing a very high performance
floating-point arithmetic unit and a set of floating-point data registers that are utilized
in a manner that is analogous to the use of the integer data registers. The TS68882
instruction set is a natural extension of all earlier members of the TS68000 Family, and
supports all of the addressing modes of the host MPU. Due to the flexible bus inter-
face of the TS68000 Family, the TS68882 can be used with any of the MPU devices of
the TS68000 Family, and it may also be used as a peripheral to non-TS68000
processors.
Screening/Quality
This product could be manufactured
in full compliance with either:
• MIL-STD-883 Class B
• DESC 5962-89436
• or According to ATMEL-
Grenoble Standards
R suffix
PGA 68
Ceramic Pin Grid Array
F suffix
CQFP 68
Ceramic Quad Flat Pack
CMOS
Enhanced
Floating-point
Co-processor
TS68882
Rev. 2119A–HIREL–04/02
1
|
|||
Pages | Pages 43 | ||
Télécharger | [ TS68882DESC03XA ] |
No | Description détaillée | Fabricant |
TS68882DESC03XA | CMOS Enhanced Floating-point Co-processor | ATMEL Corporation |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |