DataSheetWiki


TP0606 fiches techniques PDF

Supertex Inc - P-Channel Enhancement-Mode Vertical DMOS FETs

Numéro de référence TP0606
Description P-Channel Enhancement-Mode Vertical DMOS FETs
Fabricant Supertex Inc 
Logo Supertex  Inc 





1 Page

No Preview Available !





TP0606 fiche technique
TP0606
Low Threshold
P-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BVDSS /
BVDGS
-60V
RDS(ON)
(max)
3.5
ID(ON)
(min)
-1.5A
VGS(th)
(max)
-2.4V
Order Number / Package
TO-92
TP0606N3
Features
Low threshold — -2.4V max
High input impedance
Low input capacitance — 80pF typical
Fast switching speeds
Low on resistance
Free from secondary breakdown
Low input and output leakage
Complementary N- and P-channel devices
Applications
Logic level interfaces – ideal for TTL and CMOS
Solid state relays
Battery operated systems
Photo voltaic drives
Analog switches
General purpose line drivers
Telecom switches
Low Threshold DMOS Technology
These low threshold enhancement-mode (normally-off) transis-
tors utilize a vertical DMOS structure and Supertex's well-proven
silicon-gate manufacturing process. This combination produces
devices with the power handling capabilities of bipolar transistors
and with the high input impedance and positive temperature
coefficient inherent in MOS devices. Characteristic of all MOS
structures, these devices are free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where very low threshold
voltage, high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
Package Options
Absolute Maximum Ratings
Drain-to-Source Voltage
Drain-to-Gate Voltage
Gate-to-Source Voltage
Operating and Storage Temperature
Soldering Temperature*
* Distance of 1.6 mm from case for 10 seconds.
BVDSS
BVDGS
± 20V
-55°C to +150°C
300°C
SGD
TO-92
Note 1: See Package Outline section for dimensions.
Note 2: See Array section for quad pinouts.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod1ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.

PagesPages 4
Télécharger [ TP0606 ]


Fiche technique recommandé

No Description détaillée Fabricant
TP0602 MICRO SMD HARD FERRITE TRANSPONDER INDUCTOR Premo
Premo
TP0604 P-Channel Enhancement-Mode Vertical DMOS FETs Supertex  Inc
Supertex Inc
TP0606 P-Channel Enhancement-Mode Vertical DMOS FETs Supertex  Inc
Supertex Inc
TP0606 P-Channel Enhancement-Mode Vertical DMOS FETs Supertex  Inc
Supertex Inc

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche