DataSheetWiki


1313 fiches techniques PDF

Electronic Film - Metallized Polyester

Numéro de référence 1313
Description Metallized Polyester
Fabricant Electronic Film 
Logo Electronic Film 





1 Page

No Preview Available !





1313 fiche technique
ELECTRONIC FILM CAPACITORS, INC.
Reidville Industrial Park * 41 Interstate Lane
WATERBURY, CONNECTICUT 06705
PHONE (203) 755-5629 FAX (203) 755-0659
METALLIZED POLYESTER
SERIES 1313
EFC Series 1313 are metallized polyester capacitors. This series offers the advantage of
small size, self healing and low cost. Suggested applications include: medical electronics,
telecommunications and high voltage power supplies. Packaging options include: wrap
and fill (TF, TC), radial lead box (EFR), axial lead (EC, EF). Application options include:
high voltage (HV), "AC" across the line (AC), noise suppression (RC) and switching power
supply (SP).
SPECIFICATIONS
1. TEMPERATURE RANGE
- 55 OC to + 85 OC at rated voltage.
To 125 OC at 50% derating.
2. CAPACITANCE
Capacitors < 1.0 MFD shall be measured
at 1 KHz + 20 HZ. Capacitors >1.0 MFD
shall be measured at 120 HZ. Measurements
shall be taken at 25 OC.
3. DIELECTRIC STRENGTH
At 25 OC, 150% of rated voltage when applied
terminal to terminal for one minute through a
current limiting resistance.
4. INSULATION RESISTANCE
At 25 OC after 2 minutes charge time at rated voltage
or 500 VDC, whichever is less, the minimum IR shall
be 30,000 Megohm-Microfarad, but need not exceed
50,000 Megohms for voltages greater than 50 VDC,
and 15,000 Megohm-Microfarads, but need not exceed
30,000 Megohms for 50 VDC or less.
5. HUMIDITY RESISTANCE
Series 1313 shall meet the requirements
of MIL-STD. 202C, Method 103B.
6. DISSIPATION FACTOR
Shall be 1.0 % max. when measured as in Par. 2.
7. LIFE TEST
Will withstand the application of 150% rated voltage at +125 0C for 250 hours
with not more than one failure in 12 permitted.
TYPICAL TEMPERATURE CURVES
METALLIZED POLYESTER
CAPACITANCE CHANGE VS. TEMPERATURE
+15
+10
+5
0
-5
-10
-15
-55 -25
0 25 50
Temperature (OC)
85
125
DISSIPATION FACTOR VS. TEMPERATURE
2.5
2.0
1.5
1.0
0.5
0
-55
-25
0 25 50
Temperature (OC)
85
125
INSULATION RESISTANCE VS. TEMPERATURE
105
104
103
102
10
+25
+50 +85
Temperature (OC)
+125

PagesPages 13
Télécharger [ 1313 ]


Fiche technique recommandé

No Description détaillée Fabricant
1310 200 V - 1/000 V Single Phase Bridge ETC
ETC
1310 200 V - 1/000 V Single Phase Bridge ETC
ETC
1310 Diode ( Rectifier ) American Microsemiconductor
American Microsemiconductor
1310F 200 V - 1/000 V Single Phase Bridge ETC
ETC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche