|
|
PDF 74LV573 Data sheet ( Hoja de datos )
| Número de pieza | 74LV573 | |
| Descripción | Octal D-type transparent latch 3-State | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74LV573 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
74LV573
Octal D-type transparent latch (3-State)
Product specification
Supersedes data of 1997 Jun 06
IC24 Data Handbook
1998 Jun 10
Philips
Semiconductors
1 page  
Philips Semiconductors
Octal D-type transparent latch (3-State)
Product specification
74LV573
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
SYMBOL
PARAMETER
CONDITIONS
VCC
±IIK
±IOK
±IO
DC supply voltage
DC input diode current
DC output diode current
DC output source or sink current
– bus driver outputs
VI < –0.5 or VI > VCC + 0.5V
VO < –0.5 or VO > VCC + 0.5V
–0.5V < VO < VCC + 0.5V
RATING
–0.5 to +7.0
20
50
35
UNIT
V
mA
mA
mA
±IGND,
±ICC
DC VCC or GND current for types with
–bus driver outputs
70 mA
Tstg Storage temperature range
Power dissipation per package
for temperature range: –40 to +125°C
–65 to +150
°C
–plastic DIL
Ptot –plastic mini-pack (SO)
above +70°C derate linearly with 12mW/K 750 mW
above +70°C derate linearly with 8 mW/K
500
–plastic shrink mini-pack (SSOP and TSSOP) above +60°C derate linearly with 5.5 mW/K
400
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP.
MAX
UNIT
VCC
VI
VO
Tamb
DC supply voltage
Input voltage
Output voltage
Operating ambient temperature range in free
air
See Note 1
See DC and AC
characteristics
1.0 3.3 5.5
0 – VCC
0 – VCC
–40 +85
–40 +125
V
V
V
°C
tr, tf Input rise and fall times
VCC = 1.0V to 2.0V
VCC = 2.0V to 2.7V
VCC = 2.7V to 3.6V
VCC = 3.6V to 5.5V
–
–
–
–
– 500
–
–
200
100
ns/V
– 50
NOTE:
1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 5.5V.
1998 Jun 10
5
5 Page 
Philips Semiconductors
Octal D-type transparent latch (3-State)
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm
Product specification
74LV573
SOT339-1
1998 Jun 10
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet 74LV573.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74LV573 | Octal D-type transparent latch 3-State | Philips |
| 74LV574 | Octal D-type flip-flop; positive edge-trigger 3-State | Philips |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |