|
|
PDF MD1352 Data sheet ( Hoja de datos )
| Número de pieza | MD1352 | |
| Descripción | Ultra High Sensitivity Gateable Channel Photomultiplier DC-Modules | |
| Fabricantes | PerkinElmer Optoelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MD1352 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Lighting
Imaging
Telecom
Sensors
Channel Photomultipliers and Modules
MD Series CPM Modules
Ultra High Sensitivity Gateable Channel
Photomultiplier DC-Modules
Description
The Channel Photomultiplier DC-
Module series is designed for all low
light applications e.g. in industries,
life science or medical analysis, in
high energy physics or pure research.
It is an easy to use module, containing
the Channel Photomultiplier,
a high voltage power supply, an
amplifier with I/U conversion
and an active quenching circuit for
high light protection. It is also
possible to apply an external gate
function. Strong variations in light
levels are possible due to the high
dynamic range of the installed CPM.
The exceptional low noise and high
sensitivity facilitates detection of
extremely low light levels.
Features
· High dynamic range
· No cooling required
· Very high stability in noise level
· Adjustable gain
· Active quenching
· Circuit for high light protection
· Gateable CPM input (only Bialkali types)
· Optical fiber read-out possible
· 5 volts operating voltage
· Monitor voltage output
www.per kinelmer.com/opto
.
1 page  
Dimensions (mm)
MD 900 Series
MD 1300 Series
MD 1900 Series
Connections
Red: Vcc, input (+5 V to +5.5 V DC)
Black: GND
Coax: External Gate in (TTL,active high)
Yellow: Monitor voltage output (|Vch-ent /1000|)
Green: Control voltage input via ext.
OpAmp (ref. to manual)
BNC Connector:
- DC 0 - 10 V Signal Output
- GND
CPM
· CAUTION: HIGH VOLTAGE WARNING
This product operates at high voltage. Extreme care must be taken to ensure operator safety and to avoid damage to other
instruments. Avoid direct contact with the entrance window of the built in CPM when high voltage is applied. Avoid placing
conductive material close to the cathode.
Ensure that no light levels are applied, generating higher anode currents than specified.
All given values are nominal/typical @ 20 °C ambient temperature; specification subject to change without notice
USA:
PerkinElmer Optoelectronics
2175 Mission College Blvd.
Santa Clara, CA 95054
Phone: (408) 565-0850
Fax: (408) 565-0793
EUROPE:
PerkinElmer Optoelectronics GmbH
Wenzel-Jaksch-Str. 31
65199 Wiesbaden
Germany
Phone: +49 611 492 534
Fax: +49 611 492 578
© 2001 PerkinElmer, Inc. All rights reserved.
ASIA:
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: +65 775 2022
Fax: +65 775 1008
www.per kinelmer.com/opto
.
DS-287 Rev A 1101
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MD1352.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MD1352 | Ultra High Sensitivity Gateable Channel Photomultiplier DC-Modules | PerkinElmer Optoelectronics |
| MD1353 | Ultra High Sensitivity Gateable Channel Photomultiplier DC-Modules | PerkinElmer Optoelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |