DataSheetWiki


74LVQ574M fiches techniques PDF

STMicroelectronics - OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUTS NON INVERTING

Numéro de référence 74LVQ574M
Description OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUTS NON INVERTING
Fabricant STMicroelectronics 
Logo STMicroelectronics 





1 Page

No Preview Available !





74LVQ574M fiche technique
® 74LVQ574
OCTAL D-TYPE FLIP FLOP
WITH 3 STATE OUTPUTS NON INVERTING
s HIGH SPEED:
fMAX = 180 MHz (TYP.) at VCC = 3.3V
s COMPATIBLE WITH TTL OUTPUTS
s LOW POWER DISSIPATION:
ICC = 4 µA (MAX.) at TA = 25 oC
s LOW NOISE:
VOLP = 0.5 V (TYP.) at VCC = 3.3V
s 75TRANSMISSION LINE DRIVING
CAPABILITY
s SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 12 mA (MIN)
s PCI BUS LEVELS GUARANTEED AT 24 mA
s BALANCED PROPAGATION DELAYS:
tPLH tPHL
s OPERATING VOLTAGE RANGE:
VCC (OPR) = 2V to 3.6V (1.2V Data Retention)
s PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 574
s IMPROVED LATCH-UP IMMUNITY
DESCRIPTION
The LVQ574 is a low voltage CMOS OCTAL
D-TYPE FLIP FLOP with 3 STATE OUTPUTS
NON INVERTING fabricated with sub-micron
silicon gate and double-layer metal wiring C2MOS
technology. It is ideal for low power and low noise
3.3V applications.
These 8 bit D-Type flip-flops are controlled by a
clock input (CK) and an output enable input (OE).
M
(Micro Package)
T
(TSSOP Package)
ORDER CODES :
74LVQ574M
74LVQ574T
On the positive transition of the clock, the Q
outputs will be set to logic state that were setup
at the D inputs.
While the (OE) input is low, the 8 outputs will be
in al normal logic state (high or low logic level)
and while high level, the outputs will be in a high
impedance state.
The output control does not affect the internal
operation of flip flop, that is, the old data can be
retained or the new data can be entered even
while the outputs are off.
It has better speed performance at 3.3V than 5V
LS-TTL family combined with the true CMOS low
power consumpion.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
February 1999
1/10

PagesPages 10
Télécharger [ 74LVQ574M ]


Fiche technique recommandé

No Description détaillée Fabricant
74LVQ574 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUTS NON INVERTING STMicroelectronics
STMicroelectronics
74LVQ574M OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUTS NON INVERTING STMicroelectronics
STMicroelectronics
74LVQ574T OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUTS NON INVERTING STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche