|
|
PDF MAX2326 Data sheet ( Hoja de datos )
| Número de pieza | MAX2326 | |
| Descripción | Adjustable / High-Linearity / SiGe Dual-Band LNA/Mixer ICs | |
| Fabricantes | Maxim Integrated | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX2326 (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
19-1535; Rev 1; 6/00
EVFAOLLULAOTWIOSNDKAITTAMSAHNEUEATL
Adjustable, High-Linearity,
SiGe Dual-Band LNA/Mixer ICs
General Description
The MAX2320/MAX2321/MAX2322/MAX2324/MAX2326/
MAX2327 high-performance silicon germanium (SiGe)
receiver front-end ICs set a new industry standard for
low noise and high linearity at a low supply current. This
family integrates a variety of unique features such as an
LO frequency doubler and divider, dual low-noise
amplifier (LNA) gain settings, and a low-current paging
mode that extends the handset standby time.
The MAX2320 family includes six ICs: four operate at
both cellular and PCS frequencies, one operates at cel-
lular frequencies, and one at PCS frequencies (see
Selector Guide). Each part includes an LNA with a high
input third-order intercept point (IIP3) to minimize inter-
modulation and cross-modulation in the presence of
large interfering signals. In low-gain mode, the LNA is
bypassed to provide higher cascaded IIP3 at a lower
current. For paging, a low-current, high-gain mode is
provided.
The CDMA mixers in cellular and PCS bands have high
linearity, low noise, and differential IF outputs. The FM
mixer is designed for lower current and a single-ended
output.
All devices come in a 20-pin TSSOP-EP package with
exposed paddle (EP) and are specified for the extend-
ed temperature range (-40°C to +85°C).
Features
o Ultra-High Linearity at Ultra-Low Current and
Noise
o +2.7V to +3.6V Operation
o Pin-Selectable Low-Gain Mode Reduces Gain by
17dB and Current by 3mA
o Pin-Selectable Paging Mode Reduces Current
Draw by 6mA when Transmitter Is Not in Use
o LO Output Buffers
o LO Frequency Doubler (MAX2321)
o LO Frequency Divider (MAX2326)
o 0.1µA Shutdown Current
o 20-Pin TSSOP-EP Package
PART
MAX2320EUP
MAX2321EUP
MAX2322EUP
MAX2324EUP
MAX2326EUP
MAX2327EUP
Ordering Information
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
20 TSSOP-EP
20 TSSOP-EP
20 TSSOP-EP
20 TSSOP-EP
20 TSSOP-EP
20 TSSOP-EP
Applications
CDMA/TDMA/PDC/WCDMA/GSM Cellular Phones
Single/Dual/Triple-Mode Phones
Wireless Local Loop (WLL)
Selector Guide
PART
MAX2320
MAX2321
MAX2322
MAX2324
MAX2326
MAX2327
DESCRIPTION
Dual-band, dual VCO inputs, and dual IF outputs
MAX2320 with LO doubler
PCS band, single mode with optional frequency
doubler
Cellular band, dual IF outputs
MAX2320 with LO divider
Dual-band, dual VCO inputs, and separately
controlled VCO buffers
Typical Application Circuits appear at end of data sheet.
Pin Configurations
TOP VIEW
LNAOUTH 1
LNAOUTL 2
RLNA 3
LNAINH 4
20 TSSOP-EP
6mm x 6.3mm
LNAINL 5
BAND 6
LIN 7
GAIN 8
LOLIN 9
LOHIN 10
MAX2320
MAX2321
MAX2326
20 MIXINH
19 MIXINL
18 RBIAS
17 CDMA+
16 CDMA-
15 BUFFEN
14 VCC
13 FMOUT
12 LOLOUT
11 LOHOUT
TSSOP
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
1 page  
Adjustable, High-Linearity,
SiGe Dual-Band LNA/Mixer ICs
AC ELECTRICAL CHARACTERISTICS (continued)
(MAX232_ EV kit, VCC = +2.75V, fLNAINH = fMIXINH = 1960MHz, fLNAINL = fMIXINL = 881MHz, fLOLIN = 1091MHz (digital mode), fLOLIN =
991MHz (FM mode), fLOHIN = 1750MHz (MAX2320, MAX2322 with LOX2 = low, MAX2326 with BAND = low, MAX2327), fLLOHIN =
1085MHz (MAX2321 with BAND = low, MAX2322 with LOX2 = high), fLOHIN = 1091MHz (MAX2321 with BAND = high), fLOHIN =
2182MHz (MAX2326 with BAND = high), LO input power = -7dBm (MAX2320/MAX2326), 50Ω system, TA = +25°C, unless otherwise
noted.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
Input Third-Order
Intercept (Notes 5, 6)
PCS
Cellular
LOW-GAIN, HIGH-LINEARITY MODES (Note 1)
Gain (Note 4)
PCS
G
Cellular
MIN -3σ TYP +3σ MAX UNITS
+6.5
+6
dBm
-2
dB
-1.5
Gain Variation Over
Temperature
Relative to +25°C
TA = -40°C to
+85°C
PCS
Cellular
0.5
dB
0.5
Noise Figure (Note 5)
PCS
NF
Cellular
Input Third-Order
Intercept (Notes 5, 6)
PCS
IIP3
Cellular
MIXER PERFORMANCE
HIGH-GAIN, HIGH-LINEARITY, AND LOW-GAIN MODES (Note 1)
TA = +25°C, PCS
Without doubler
With doubler
Gain (Note 4)
G
TA = -40°C to
+85°C, PCS
Without doubler
With doubler
TA = +25°C, cellular
TA = -40°C to +85°C, cellular
11
10.5
10
9.6
12
11.3
+10.5
+11.5
5
4
+11.5
+12.5
5.5
4.25
+12.5
+13.5
11.8 12.5 13.2
11.1 12 12.9
10.8 12.5 14.3
10.4 12 13.1
127 13.4 14.0
11.9 13.4 15.5
6
4.5
14
13.5
15.3
14.3
14.7
16.5
dB
dBm
dB
Gain Variation Over
Temperature Relative to
+25°C (Note 5)
TA = -40°C to
+85°C
PCS
Cellular
±1
dB
±1
Noise Figure
Input Third-Order
Intercept (Notes 5, 6)
Input dB Compression
PCS
NF
Cellular
Without doubler
With doubler
Without divider
With divider
7.5 7.8
8
11 12.3 13.5
7.5 8.1 8.5
7.8 8.4 8.8
PCS,
Without doubler
IIP3 TA = TMIN to TMAX With doubler
Cellular,
TA = TMIN to TMAX
1.8 2.4 +4
1.4 2.8 +4.7
1 1.8 3.2
PCS
Cellular
TA = TMIN to TMAX
-11
-12
-10
-10.7
dB
dBm
dBm
_______________________________________________________________________________________ 5
5 Page 
Adjustable, High-Linearity,
SiGe Dual-Band LNA/Mixer ICs
Typical Operating Characteristics (continued)
(MAX232_ EV kit, VCC = +2.75V, fLNAINH = fMIXINH = 1960MHz, fLNAINL = fMIXINL = 881MHz, fLOHIN = 1750MHz, fLOLIN = 1091MHz
(digital modes), fLOLIN = 991MHz (FM mode), LO input power = -7dBm, 50Ω system, all measurements include matching component
losses but not connector and trace losses, TA = +25°C, unless otherwise noted.)
CELLULAR-BAND MIXER IIP3
vs. RF INPUT LEVEL
5
4 LOW SIDE LO, LGHL HIGH SIDE LO, LGHL
3
CELLULAR-BAND MIXER IIP3
vs. LO INPUT LEVEL
6
HIGH SIDE LO, FM
5
PCS-BAND HGHL MIXER IIP3
vs. CURRENT
10
TA = +85°C, HIGH SIDE LO TA = +25°C,
8 HIGH SIDE LO
2 LOW SIDE LO, HGHL
1
0 LOW SIDE LO, HGLL
-1
HIGH SIDE LO, HGLL
-2
-3 HIGH SIDE LO, HGHL
-4
-5
-35
-30 -25 -20 -15
RF INPUT LEVEL PER TONE (dBm)
-10
4 HIGH SIDE LO, HGHL AND LGHL
3
2
LOW SIDE LO, LOW SIDE LO, FM
HGHL AND LGHL
1
HIGH SIDE LO, HGLL LOW SIDE LO, HGLL
0
-18 -14 -10 -6 -2 2 6 10
LO INPUT LEVEL (dBm)
6
4
2
0
-2
-4
6
TA = +85°C, LOW SIDE LO
TA = +25°C, LOW SIDE LO
TA = -40°C, LOW SIDE LO
TA = -40°C, HIGH SIDE LO
11 16
MIXER CURRENT (mA)
PCS-BAND HGHL MIXER IIP3
vs. CURRENT
8
HIGH SIDE LO, 3V HIGH SIDE LO, 2.7V
6
LOW SIDE LO, 3V
4
HIGH SIDE LO, 3.6V
2 LOW SIDE LO, 3.6V
LOW SIDE LO, 2.7V
0
-2
-4
6
11 16
MIXER CURRENT (mA)
PCS-BAND MIXER IIP3
vs. RF INPUT LEVEL
8
7 HIGH SIDE LO, HGHL, HIGH SIDE LO, LGHL
6
5 LOW SIDE LO, LGHL
4
3 LOW SIDE LO, HGHL
2
1
0
-1 LOW SIDE LO, HGLL
-2
-3 HIGH SIDE LO, HGLL
-4
-35 -30 -25 -20 -15 -10
RF INPUT LEVEL PER TONE (dBm)
PCS-BAND MIXER IIP3
vs. LO INPUT LEVEL
8
HIGH SIDE LO, LGHL
7 HIGH SIDE LO, HGHL
6
5 LOW SIDE LO, HGHL
4
3 LOW SIDE LO, LGHL
2 LOW SIDE LO, HGLL
1
HIGH SIDE LO, HGLL
0
-18 -14 -10 -6
-2
2
6 10
LO INPUT LEVEL (dBm)
CELLULAR-BAND HGHL MIXER NOISE
FIGURE vs. LO INPUT LEVEL
14
12
LOW SIDE LO
10
8
6 HIGH SIDE LO
4
2
0
-17
-12 -7
-2
LO INPUT LEVEL (dBm)
3
CELLULAR-BAND HGLL MIXER NOISE
FIGURE vs. LO INPUT LEVEL
14
12 LOW SIDE LO
10
8
6 HIGH SIDE LO
4
2
0
-17
-12 -7
-2
LO INPUT LEVEL (dBm)
3
CELLULAR-BAND FM MIXER
NOISE FIGURE vs. LO INPUT LEVEL
16
14
12
LO SIDE LO
10
HIGH SIDE LO
8
6
4
2
0
-17
-12 -7 -2
LO INPUT LEVEL (dBm)
3
______________________________________________________________________________________ 11
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet MAX2326.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX232 | Dual EIA-232 Drivers/Receivers |  Texas Instruments |
| MAX232 | Multichannel RS-232 Drivers/Receivers | Maxim Integrated |
| MAX2320 | Adjustable / High-Linearity / SiGe Dual-Band LNA/Mixer ICs | Maxim Integrated |
| MAX2321 | Adjustable / High-Linearity / SiGe Dual-Band LNA/Mixer ICs | Maxim Integrated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |