|
|
Número de pieza | MM1075 | |
Descripción | System Reset (with built-in watchdog timer) Monolithic IC | |
Fabricantes | MITSUMI | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MM1075 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! MITSUMI
System Reset (with built-in watchdog timer) MM1075
System Reset (with built-in watchdog timer)
Monolithic IC MM1075
Outline
This IC functions in a variety of CPU systems and other logic systems to generate a reset signal and reset the
system accurately during momentary interruption or lowering of power supply voltage.
It also has a built-in watchdog timer for operation diagnosis. This prevents the system from running wild by
generating an intermittent reset pulse during system mis-operation.
Features
1. Built-in watchdog timer
2. Low minimum operating voltage
VCC=0.8V typ.
3. Both positive and negative logic reset output can be extracted
4. Accurate detection of drop in power supply voltage
5. Detection voltage has hysteresis
6. Few external parts
1 capacitor
7. Timer monitoring time can be varied by using an external resistor
Package
DIP-8A (MM1075XD)
SOP-8A (MM1075XF)
Applications
Microcomputer system monitoring, etc.
Absolute Maximum Ratings (Ta=25°C)
Item
Storage temperature
Operating temperature
Power supply voltage
Voltage applied to VS & CK pins
--------------------------------------------------------------
Voltage applied to RESET, RESET pin
Allowable loss
Symbol
TSTG
TOPR
VCC max.
VVS &VCK
VOH
Pd
Rating
-40~+125
-20~+70
-0.3~+10
-0.3~+10
-0.3~+10
400
Units
°C
°C
V
V
V
mW
1 page MITSUMI
Timing Chart
VCC VSH
VSL
CK
CT
RESET
RESET
System Reset (with built-in watchdog timer) MM1075
TCK
TPR TWD
TWR
Pin Assignment
8765
1234
1 TC
2 RESET
3 CK
4 GND
5 VCC
6 RCT
7 VS
-----------------------------------------------------------------------------
8 RESET
Pin Description
Pin No. Pin Name
Function
1 TC TWD, TWR, TPR variable pins.(TWD, TWR and TPR times are determined by the external capacitor.)
2 RESET Reset output pin (High output)
3 CK Clock input pin (inputs clock from logic system)
4 GND
5 VCC 4.2V detection voltage
6 RCT Watchdog timer stop pin Operation modes : Operation OPEN, Stop connect to GND
7 VS Detection voltage variable pin Adjustment modes : Lower pull up resistance, Raise pull down
---------------------------------------------------------------
8 RESET Reset output pin (Low output)
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet MM1075.PDF ] |
Número de pieza | Descripción | Fabricantes |
MM1075 | System Reset (with built-in watchdog timer) Monolithic IC | MITSUMI |
MM1075XD | System Reset (with built-in watchdog timer) Monolithic IC | MITSUMI |
MM1075XF | System Reset (with built-in watchdog timer) Monolithic IC | MITSUMI |
MM1077 | Compander IC | Mitsumi Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |