|
|
Número de pieza | MM1093NF | |
Descripción | 4fsc Clock Generator | |
Fabricantes | MITSUMI | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MM1093NF (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! MITSUMI
4fsc Clock Generator
Monolithic IC MM1093
4fsc Clock Generator MM1093
Outline
This IC generates a clock used for driving the CCD that configures a comb filter for Y/C separation, or for
sampling A/D and D/A converters that configure a digital comb filter.
It has a built-in subcarrier oscillator (3.58MHz or 4.43MHz) synchronized to the input chroma signal, and a
clock oscillator that is 4 times the latter. MM1093ND and NF are available for NTSC format, and MM1093PD
and PF for PAL format.
Features
1. Built-in fsc synchronized to input chroma signal and 4fsc oscillators
2. Reduced number of external parts due to 1 pin VCXO
3. +5V single power supply
Package
SOP-16A (MM1093NF, MM1093PF)
DIP-16B (MM1093ND, MM1093PD)
Applications
1. TV
2. VCR
Equivalent Circuit Diagram
1 page MITSUMI
4fsc Clock Generator MM1093
Electrical Characteristics (Except where noted otherwise, Ta=25°C, VCC=5.0V, SG1, SG2 : no signal, SW1 : A)
Item
Operating power supply voltage
Consumption current
Sync separation circuit
Sync separation level
PLL circuit
ACC input amplitude range
APC1 frequency
acquisition range
VCO1 free run frequency deviation
fSC output level
fSC output duty
4fSC circuit
4fSC output level
4fSC output DT
fSC leakage
Symbol
Measurement
circuit
VCC
VCC
ICC -
VS TP3
VIN TP1
fC
f0
VO1 TP2
DO1
VO2
DO2 TP3
Lfsc
Measurement conditions
*SG2 : 1VP-P staircase wave 1
SG1 : separate chroma signal
*SW1 : B 5
* *SG1 : separate chroma signal 2 5
SG1 : sine wave 143mVP-P
*SG2 : 1VP-P staircase wave 3
*4
SG1 : separate chroma signal
*SG2 : 1VP-P staircase wave 5
SG1 : separate chroma signal
*SG2 : 1VP-P staircase wave 5
SG1 : separate chroma signal
SG2 : 1VP-P staircase wave
*SW1 : B 5
SG1 : separate chroma signal
SG2 : 1VP-P staircase wave
*SW1 : B 5
SG1 : separate chroma signal
SG2 : 1VP-P staircase wave
*SW1 : B 5
Min. Typ. Max. Units
4.7 5.0 5.3 V
24 32 mA
40 80 120 mV
15
400
-250 0
0.8 1.0
560 mVP-P
Hz
250 Hz
1.2 VP-P
45 50 55 %
0.8 1.0 1.2 VP-P
45 50 55 %
50 dB
Notes:
*1 Sync separation level
Measure the level where SG1 input signal and TP3 output signal synchronize when 1VP-P staircase wave
sync signal level is raised from 0V.
SG2 : 1VP-P staircase wave
1VP-P
VS
Hsync
*2 ACC input amplitude range
Defined as separate chroma signal burst signal amplitude that can be input to chroma input.
*3 APC1 frequency pull-in range
Defined as the smaller of the differences when input signal frequency is changed from high to fO and from
low to fo when TP2 output is not synchronized to SG1 input signal and when it is synchronized.
*4 VCO1 free run frequency deviation
Defined as the difference between TP2 output signal frequency and fO.
*5 The standard for the separate chroma signal is burst signal 143mVP-P.
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet MM1093NF.PDF ] |
Número de pieza | Descripción | Fabricantes |
MM1093ND | 4fsc Clock Generator | MITSUMI |
MM1093NF | 4fsc Clock Generator | MITSUMI |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |