DataSheetWiki


93C56 fiches techniques PDF

ATMEL Corporation - 3-Wire Serial EEPROMs

Numéro de référence 93C56
Description 3-Wire Serial EEPROMs
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





93C56 fiche technique
Features
Low-voltage and Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
User-selectable Internal Organization
– 1K: 128 x 8 or 64 x 16
– 2K: 256 x 8 or 128 x 16
– 4K: 512 x 8 or 256 x 16
Three-wire Serial Interface
2 MHz Clock Rate (5V)
Self-timed Write Cycle (10 ms max)
High Reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
Automotive Grade, Extended Temperature and Lead-Free/Halogen-Free
Devices Available
8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP,
and 8-ball dBGA2 Packages
Description
The AT93C46/56/66 provides 1024/2048/4096 bits of serial electrically erasable pro-
grammable read-only memory (EEPROM), organized as 64/128/256 words of 16 bits
each (when the ORG pin is connected to VCC), and 128/256/512 words of 8 bits each
(when the ORG pin is tied to ground). The device is optimized for use in many indus-
trial and commercial applications where low-power and low-voltage operations are
essential. The AT93C46/56/66 is available in space-saving 8-lead PDIP, 8-lead
JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, and 8-lead dBGA2
packages.
The AT93C46/56/66 is enabled through the Chip Select pin (CS) and accessed via a
three-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift
Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the
data is clocked out serially on the DO pin. The Write cycle is completely self-timed,
and no separate Erase cycle is required before Write. The Write cycle is only enabled
when the part is in the Erase/Write Enable state. When CS is brought high following
the initiation of a Write cycle, the DO pin outputs the Ready/Busy status of the part.
The AT93C46/56/66 is available in 2.7V to 5.5V and 1.8V to 5.5V versions.
Table 1. Pin Configurations
Pin Name
Function
CS Chip Select
SK Serial Data Clock
DI Serial Data Input
DO Serial Data Output
GND
Ground
VCC
Power Supply
ORG
Internal Organization
DC Don’t Connect
8-lead SOIC
8-lead dBGA2
CS 1
SK 2
DI 3
DO 4
8 VCC
7 DC
6 ORG
5 GND
VCC
DC
ORG
GND
8
7
6
5
1 CS
2 SK
3 D1
4 D0
8-lead PDIP
CS 1
SK 2
DI 3
DO 4
8 VCC
7 DC
6 ORG
5 GND
8-lead SOIC
Rotated (R)
(1K JEDEC Only)
DC
VCC
CS
SK
1
2
3
4
8 ORG
7 GND
6 DO
5 DI
8-lead MAP
VCC 8
DC 7
ORG 6
GND 5
1 CS
2 SK
3 DI
4 DO
8-lead TSSOP
CS 1
SK 2
DI 3
DO 4
8 VCC
7 DC
6 ORG
5 GND
Three-wire
Serial
EEPROMs
1K (128 x 8 or 64 x 16)
2K (256 x 8 or 128 x 16)
4K (512 x 8 or 256 x 16)
AT93C46
AT93C56(1)
AT93C66(2)
Note: 1. This device is not recom-
mended for new designs.
Please refer to AT93C56A.
2. This device is not recom-
mended for new designs.
Please refer to AT93C66A.
0172Z–SEEPR–9/05
1

PagesPages 21
Télécharger [ 93C56 ]


Fiche technique recommandé

No Description détaillée Fabricant
93C56 3-Wire Serial EEPROMs ATMEL Corporation
ATMEL Corporation
93C56 16Kbit/ 8Kbit/ 4Kbit/ 2Kbit/ 1Kbit and 256bit 8-bit or 16-bit wide STMicroelectronics
STMicroelectronics
93C56 Electrically Erasable Programmable Memories National Semiconductor
National Semiconductor
93C56 2K 5.0V Automotive Temperature Microwire Serial EEPROM Microchip Technology
Microchip Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche