|
|
PDF OP955 Data sheet ( Hoja de datos )
| Número de pieza | OP955 | |
| Descripción | PIN Sili con Pho todiode | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OP955 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Product Bulletin OP955
June 1996
PIN Silicon Photodiode
Type OP955
Features
• Wide receiving angle
• Linear response vs. irradiance
• Fast switching time
• Side-looking package ideal for space
limited applications
Description
The OP955 devices consists of a PIN
silicon photodiode molded in a clear
epoxy package which allows spectral
response from visible to infrared
wavelengths. The wide receiving angle
provides relatively even reception over a
large area. The side-looking package is
designed for easy PC board mounting.
The lensing effect of the package allows
an acceptance half angle of 45o
measured from the optical axis to the half
power point. These devices are 100%
production tested using infrared light for
close correlation with Optek’s GaAs and
GaAlAs emitters.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Reverse Breakdown Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . -40o C to +100o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260o C(1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
Max. 20 grams force may be applied to leads when soldering.
(2) Derate linearly 1.67 mW/o C above 25o C.
(3) Light source is an unfiltered GaAs LED with a peak emission wavelength of 935nm and a
radiometric intensity level which varies less than 10% over the entire lens surface of the
photodiode being tested.
(4)
To calculate typical dark current
ambient temperature in o C.
in
µA,
use
the
formula
ID
=
10(0.042
TA-1.5)
where
TA
is
Typical Performance Curves
Relative Response vs.
Wavelength
Coupling Characteristics
OP955 and OP245
VR = 5 V
IF = 20 mA
Optek Technology, Inc.
1215 W. Crosby Road
λ- Wavelength - nm
Carrollton, Texas 75006
3-62
Distance Between Lens Tips - inches
(972) 323-2200
Fax (972) 323-2396
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet OP955.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OP950 | PIN Sili con Pho todiode | ETC |
| OP954 | PIN Sili con Pho todiode | ETC |
| OP955 | PIN Sili con Pho todiode | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |