DataSheetWiki


OZ6833T fiches techniques PDF

ETC - ACPI CardBus Controller

Numéro de référence OZ6833T
Description ACPI CardBus Controller
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





OZ6833T fiche technique
FEATURES
Single-chip CardBus host adapter
Supports 2 PCMCIA 1.0 and JEIDA 4.2 R2 cards or 2
CardBus cards
ACPI-PCI Bus Power Management Interface
Specification Rev1.0 Compliant
Supports OnNow LAN wakeup, OnNow Ring Indicate,
PCI CLKRUN#, PME#, and CardBus CCLKRUN#
Compliant with PCI specification v2.1S, 1998 PC Card
Standard 7.0
Yenta PCI to PCMCIA CardBus Bridge register
compatible
ExCA (Exchangeable Card Architecture) compatible
registers map-able in memory and I/O space
Intel 82365SL PCIC Register Compatible
Supports PCMCIA_ATA Specification
Supports 5V/3.3V PC Cards and 3.3V CardBus cards
Supports two PC Card or CardBus slots with hot
insertion and removal
Supports multiple FIFOs for PCI/CardBus data transfer
Supports Direct Memory Access for PC/PCI and
PC/Way on PC Card socket
Programmable interrupt protocol: PCI, PCI+ISA,
PCI/Way, or PC/PCI interrupt signaling modes
Win’98 IRQ and PC-97/98 compliant
Parallel or Serial interface for socket power control
devices (TI or Micrel)
Zoomed Video Support
Integrated PC 98 – Subsystem Vendor ID support, with
auto lock bit
LED Activity Pins
ORDERING INFORMATION
OZ6833T – 208 pin TQFP
OZ6833B – 208 pin Mini-BGA
GENERAL DESCRIPTION
The OZ6833 ACPI CardBus controller provides a high
performance, synchronous, 32-bit, bus master/target
interface between computers and plug in PC Cards.
CardBus is the new 32-bit interface standard of Personal
Computer Memory Card International Association,
PCMCIA. The CardBus provides 32-bit interface with
multiplexed address and data lines. This will allow the
addition of high performance computer system
enhancements and new functions in a user-friendly way.
Further, the expansion capability of the CardBus will
provide benefits to the end user. CardBus is intended to
OZ6833
ACPI CardBus Controller
support “temporal” add-in functions on PC Cards, such as
Memory cards, Network interfaces, FAX/Modems and other
wireless communication cards, etc. The high performance
and capability of the CardBus interface will enable further
development of many new functions and applications.
The OZ6833 CardBus controller is a 33MHz PCI compliant
master/target device that attaches to the PCI bus and
manages two PC Card sockets. The PC Card sockets
support both 3.3V / 5V versions of 8/16-bit PCMCIA R2
card or 32-bit CardBus card. R2 card support is compatible
with the Intel 82365SL PCIC controller. CardBus card
support is fully compatible with the 1998 PC Card Standard
V7.0. The OZ6833 is a stand alone device. It does not
require an additional buffer chip for the two PC Card socket
interface. The OZ6833 is implemented with a complex
multiple FIFO data buffer for the PCI and CardBus interface
to provide better PCI/CardBus access.
The FIFO buffers allow the bridge to accept data from a
target bus while moving data to it, facilitating deadlock
prevention. In addition, the OZ6833 is designed with
dynamic PC Card hot insertion and removal and auto
configuration capabilities.
The OZ6833 ACPI CardBus Controller provides the power
saving mixed 5V / 3.3V capability. An advance CMOS
process minimizes system power consumption. The device
also provides a power-down mode, allowing host software
to reduce power consumption further while stopping
internal clock distribution and the clocks on PC Card
sockets. The OZ6833 is not only a CardBus bridge, but
also a socket controller. The OZ6833 supports two master
devices and arbitrates the priority of each. Further, it
supports inter CardBus direct data transfer. The register set
in the OZ6833 is the superset of the OZ67xx register set,
assuring full compatibility with existing socket/card-services
software and PC-card applications. The OZ6833 provides
the most advanced design flexibility for the PC Card
interface in notebook computer design.
To enhance the performance between the PCI bus and any
CardBus card, two buffers (each composed of 16 double
words) are added on both sides going from PCI to CardBus
or the other way around. By implementing these buffers,
the OZ6833 will not refuse data from a target bus while
moving data and preventing deadlock situations.
In order to allow maximum flexibility for system designers,
the CINT# of the PC card 32-bit may be programmed to
steer to either INTA# or INTB# of the PCI bus. Further, the
interrupts may be programmed to route through the bridge
to either PCI INT lines or IRQ interrupts on the ISA bus.
04/25/00
Copyright 1999 by O2Micro
OZ6833-DS-1.55
All Rights Reserved
Page 1

PagesPages 15
Télécharger [ OZ6833T ]


Fiche technique recommandé

No Description détaillée Fabricant
OZ6833 ACPI CardBus Controller ETC
ETC
OZ6833B ACPI CardBus Controller ETC
ETC
OZ6833T ACPI CardBus Controller ETC
ETC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche