DataSheetWiki


D6461 fiches techniques PDF

NEC - UPD6461

Numéro de référence D6461
Description UPD6461
Fabricant NEC 
Logo NEC 





1 Page

No Preview Available !





D6461 fiche technique
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD6461, 6462
CMOS LSI CHIP FOR CAMCORDER ON-SCREEN CHARACTER DISPLAY
(12 ROWS × 24 COLUMNS)
The µPD6461, 6462 are CMOS LSI chips designed to provide on-screen character display for camcorders. When
combined with a microcontroller, the µPD6461, 6462 control the display of the characters displayed in the viewfinder (count,
time, date, etc.) and the recording of characters onto video tape (time, date, etc.).
Each character is created using 12 (width) × 18 (height) dots. Kanji characters and graphic symbols can also be displayed
by using two or more characters. The µPD6461, 6462 are compatible with color viewfinders and can output character signals
to three channels, the RGB channel for the color viewfinder and the VC1 and VC2 channels for the recording system and
monitor terminal.
The µPD6461, 6462 also have a power-on clear function and video RAM batch clear command, enabling the number
of operations assigned to the microcontroller to be reduced.
FEATURES
• Maximum number of characters: 12 rows × 24 columns (288 characters)
• Number of character patterns : 256 (µPD6461)/128 (µPD6462) (stored in ROM). Each pattern can be changed by
specifying a mask code option.
• Character size
: One dot per line or one dot per two lines (field)
• Number of character colors : 8
• Background
: No background, minimum background, or overall background can be selected for the
entire screen, together with rimming ON/OFF function. Any one of 8 different colors
is selectable as the background color and together with the rim color (black or white)
selectable per screen.
• Dot matrix
: Each character consists of 12 (width) × 18 (height) dots. There is no gap between
adjacent characters.
• Blinking
: Blinking can be turned on/off for each character. The blinking ratio is 1:1. The blinking
frequency can be selected from approx. 1 Hz, 2 Hz, and 0.5 Hz for the entire screen.
• Reversed characters
: Specified characters can be displayed in reverse video.
• Character signal output
: Character signals can be output to three channels. Output mode (1) (RGB + BLK, VC1
+ VBLK1, and VC2 + VBLK2) or output mode (2) (R + RBLK, B + BBLK, and G + GBLK) can
be selected by specifying a mask option. For output mode 1, three output formats are
available for the VC1 and VC2 channels (options A, B, and C).
• Clearing of video RAM
: Video RAM batch clear command and power-on clear function
• Interface with a microcontroller : 8-bit serial input supporting variable word length (LSB first or MSB first can be selected
by specifying a mask option.)
• Supply voltage
: Low-voltage operation possible (supply voltage range: 2.7 to 5.5 V)
The information in this document is subject to change without notice.
Document No. S13320EJ1V1DS00 (1st edition)
Date Published November 1998 N CP(K)
Printed in Japan
The mark shows major revised points.
© 1998

PagesPages 30
Télécharger [ D6461 ]


Fiche technique recommandé

No Description détaillée Fabricant
D6461 UPD6461 NEC
NEC
D6467 ON-SCREEN CHARACTER DISPLAY CMOS IC FOR 512-CHARACTER/ 12-ROW/ 28-COLUMN/ CAMERA-CONTAINED VCR NEC
NEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche