DataSheetWiki


1203P60 fiches techniques PDF

ON Semiconductor - NCP1203

Numéro de référence 1203P60
Description NCP1203
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





1203P60 fiche technique
NCP1203
PWM Current−Mode
Controller for Universal
Off−Line Supplies Featuring
Standby and Short Circuit
Protection
Housed in SOIC−8 or PDIP−8 package, the NCP1203 represents a
major leap toward ultra−compact Switchmode Power Supplies and
represents an excellent candidate to replace the UC384X devices. Due
to its proprietary SMARTMOSt Very High Voltage Technology, the
circuit allows the implementation of complete off−line AC−DC
adapters, battery charger and a high−power SMPS with few external
components.
With an internal structure operating at a fixed 40 kHz, 60 kHz or
100 kHz switching frequency, the controller features a high−voltage
startup FET which ensures a clean and loss−less startup sequence. Its
current−mode control naturally provides good audio−susceptibility
and inherent pulse−by−pulse control.
When the current setpoint falls below a given value, e.g. the output
power demand diminishes, the IC automatically enters the so−called
skip cycle mode and provides improved efficiency at light loads
while offering excellent performance in standby conditions. Because
this occurs at a user adjustable low peak current, no acoustic noise
takes place.
The NCP1203 also includes an efficient protective circuitry which,
in presence of an output over load condition, disables the output
pulses while the device enters a safe burst mode, trying to restart.
Once the default has gone, the device auto−recovers. Finally, a
temperature shutdown with hysteresis helps building safe and robust
power supplies.
Features
www.DataSPhebet4FUre.ceoPmackages are Available
High−Voltage Startup Current Source
Auto−Recovery Internal Output Short−Circuit Protection
Extremely Low No−Load Standby Power
Current−Mode with Adjustable Skip−Cycle Capability
Internal Leading Edge Blanking
250 mA Peak Current Capability
Internally Fixed Frequency at 40 kHz, 60 kHz and 100 kHz
Direct Optocoupler Connection
Undervoltage Lockout at 7.8 V Typical
SPICE Models Available for TRANsient and AC Analysis
Pin to Pin Compatible with NCP1200
Applications
AC−DC Adapters for Notebooks, etc.
Offline Battery Chargers
Auxiliary Power Supplies (USB, Appliances, TVs, etc.)
http://onsemi.com
8
1
SOIC−8
D1, D2 SUFFIX
CASE 751
MARKING
DIAGRAMS
8
xxxxxx
ALYW
G
1
8
1
8
PDIP−8
N SUFFIX
CASE 626
xxxxxxxxx
AWL
YYWW
1
xx = Specific Device Code
A = Assembly Location
WL, L = Wafer Lot
Y, YY = Year
W, WW = Work Week
PIN CONNECTIONS
Adj 1
FB 2
CS 3
GND 4
8 HV
7 NC
6 VCC
5 Drv
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
© Semiconductor Components Industries, LLC, 2004
October, 2004− Rev. 4
1
Publication Order Number:
NCP1203/D

PagesPages 14
Télécharger [ 1203P60 ]


Fiche technique recommandé

No Description détaillée Fabricant
1203P60 NCP1203 ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche