DataSheetWiki


JH240 fiches techniques PDF

JH Tech - 2-Wire RTD Transmitter

Numéro de référence JH240
Description 2-Wire RTD Transmitter
Fabricant JH Tech 
Logo JH Tech 





1 Page

No Preview Available !





JH240 fiche technique
JH240
2-WIRE RTD TRANSMITTER
FEATURES
For 100 ohm Platinum RTDs – Linearized
Three-Wire Lead Resistance Compensation
Low-Drift Input Amplifier
Fits Standard Connection Heads
-40 to +80 Degree C Operation
Quick-Check Output LED
DIN Rail Mounting Available
DESCRIPTION
The Model JH240 2-wire transmitter provides a 4/20mA current loop output proportional to temperature as measured
by a 100 ohm platinum RTD (resistance thermometer). A fixed-range device, it is precisely calibrated to your specified
input range at the factory. (For a rangeable 2-wire RTD transmitter see Model JH245.) RTD linearization is provided.
Three-wire input circuitry eliminates errors due to lead wire resistance. Conformal coating protects the circuitry
against condensation and corrosion in industrial atmospheres.
The JH240 is a loop-powered device. Connected in series between a 24Vdc supply and readout instruments, it
receives its power from the 4/20mA output loop. A built-in LED indicates loop current: dim at 4mA, bright at 20.
The JH240 does not provide input/output isolation.
Its small 1-3/4 inch diameter allows the transmitter to fit most standard thermocouple-type connection heads. It also
may be surface mounted. A DIN rail mounting clip option is available.
HOW TO ORDER
OEM PRODUCTS
Model Number: JH240.
Input Range:
Specify any range allowed by the
“Input Capabilities” spec (see
back).
RTD Type and Curve:
100 ohm platinum RTD only.
Standard DIN/IEC calibration is
normally used. If a different
platinum RTD curve is needed,
please specify on your order.
Output Range:
(Always 4/20mAdc.)
Power:
(Always dc loop powered.)
DIN-Rail Mounting:
Change model number to Model
JH240-DIN. (See “Installation
and Connections,” below.)
Note: Urethane coating is standard.
JH Technology 2-wire thermo-
couple and RTD transmitters can
be made available with solder-
jumper pads for range selection.
Contact the factory for details.

PagesPages 2
Télécharger [ JH240 ]


Fiche technique recommandé

No Description détaillée Fabricant
JH240 2-Wire RTD Transmitter JH Tech
JH Tech
JH24240320A LCD MODULE JEWEL HILL ELECTRONIC
JEWEL HILL ELECTRONIC
JH24240320C LCD MODULE JEWEL HILL ELECTRONIC
JEWEL HILL ELECTRONIC
JH24240320D LCD MODULE JEWEL HILL ELECTRONIC
JEWEL HILL ELECTRONIC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche