UDA1330ATS Datasheet PDF - NXP Semiconductors
| Part Number | UDA1330ATS | |
| Description | Low-cost stereo filter DAC | |
| Manufacturers | NXP Semiconductors | |
| Logo |  |
|
|
There is a preview and UDA1330ATS download ( pdf file ) link at the bottom of this page. Total 24 Pages | ||
Preview 1 page No Preview Available !
INTEGRATED CIRCUITS
DATA SHEET
UDA1330ATS
Low-cost stereo filter DAC
Preliminary specification
Supersedes data of 1999 Dec 20
File under Integrated Circuits, IC01
2000 Apr 18
|
| |
 
Philips Semiconductors
Low-cost stereo filter DAC
Preliminary specification
UDA1330ATS
FUNCTIONAL DESCRIPTION
System clock
The UDA1330ATS operates in slave mode only.
Therefore, in all applications the system devices must
provide the system clock. The system frequency (fsys) is
selectable and depends on the application mode. The
options are: 256fs, 384fs and 512fs for the L3 mode and
256fs or 384fs for the static pin mode. The system clock
must be locked in frequency to the digital interface input
signals.
The UDA1330ATS supports sampling frequencies from
16 to 55 kHz.
Application modes
The application mode can be set with the three-level
pin APPSEL (see Table 1):
• L3 mode
• Static pin mode with fsys = 384fs
• Static pin mode with fsys = 256fs.
Table 1 Selecting application mode and system clock
frequency via pin APPSEL
VOLTAGE ON
PIN APPSEL
VSSD
0.5VDDD
VDDD
MODE
fsys
L3 mode
static pin mode
256fs, 384fs or 512fs
384fs
256fs
In the L3 mode, pin APPL0 must be set to LOW. It should
be noted that when the L3 mode is used, an initialization
must be performed when the IC is powered-up.
Multiple format input interface
DATA FORMATS
The digital interface of the UDA1330ATS supports multiple
format inputs (see Fig.3).
Left and right data-channel words are time multiplexed.
The WS signal must have a 50% duty factor for all
LSB-justified formats.
The BCK clock can be up to 64fs, or in other words the
BCK frequency is 64 times the Word Select (WS)
frequency or less: fBCK ≤ 64 × fWS.
Important: the WS edge MUST fall on the negative edge
of the BCK at all times for proper operation of the digital
interface.
The UDA1330ATS also accepts double speed data for
double speed data monitoring purposes
L3 MODE
This mode supports the following input formats:
• I2S-bus format with data word length of up to 20 bits
• MSB-justified format with data word length up to 20 bits
• LSB-justified format with data word length of
16, 18 or 20 bits.
The function of an application input pin (active HIGH)
depends on the application mode (see Table 2).
Table 2 Functions of application input pins
PIN
APPL0
APPL1
APPL2
APPL3
FUNCTION
L3 MODE STATIC PIN MODE
TEST
L3CLOCK
L3MODE
L3DATA
MUTE
DEEM
SF0
SF1
For example, in the static pin mode the output signal can
be soft muted by setting pin APPL0 to HIGH.
De-emphasis can be switched on for 44.1 kHz by setting
pin APPL1 to HIGH; setting pin APPL1 to LOW will disable
de-emphasis.
STATIC PIN MODE
This mode supports the following input formats:
• I2S-bus format with data word length of up to 20 bits
• LSB-justified format with data word length of
16, 18 or 20 bits.
These four formats are selectable via the static pin codes
SF0 and SF1 (see Table 3).
Table 3 Input format selection using SF0 and SF1
FORMAT
I2S-bus
LSB-justified 16 bits
LSB-justified 18 bits
LSB-justified 20 bits
SF0 SF1
00
01
10
11
2000 Apr 18
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for UDA1330ATS electronic component. |
| Information | Total 24 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ UDA1330ATS.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| UDA1330ATS | The function is Low-cost stereo filter DAC. NXP Semiconductors | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
UDA1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||