|
|
PDF PH150S280 Data sheet ( Hoja de datos )
| Número de pieza | PH150S280 | |
| Descripción | PH150S280 Power Module | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PH150S280 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
PH150S280 Specifications
NEMIC-LAMBDA
* : For delivery, contact to our sales office.
C095-01-01B
*
**
MODEL
PH150S PH150S PH150S PH150S PH150S PH150S
ITEMS
280-3.3
280-5
280-12
280-15
280-24
280-28
1 Nominal Output Voltage
V 3.3
5
12 15 24 28
2 Maximum Output Current
A 30
30
12.5
10.0
6.3
5.4
3 Nominal Output Power
W 99
150
150
150
151.2
151.2
4 Efficiency (Typ)
5 Input Voltage Range
(∗1) %
72
82
85
85
88
88
- 200 ~ 400VDC
6 Input Current (Typ) 280VDC input A 0.47
0.65
0.63
0.63
0.61
0.61
(at full load)
360VDC input A
0.37
0.51
0.49
0.49
0.48
0.48
7 Output Voltage Accuracy
(∗1) % ± 1%
8 Output Voltage Range
(∗8) % ± 10% (At 280VDC input)
9 Maximum Ripple & Noise
(∗9) mV 100
100
150
150
240
280
10 Maximum Line Regulation
(∗2) mV
20
20
48
60
96 112
11 Maximum Load Regulation (∗3) mV
40
40
96 120 192 224
12 Over Current Protection
(∗4) - 105% ~ 150%
13 Over Voltage Protection
(∗5) - 165~240% 125% ~ 145%
14 Remote Sensing
- Possible
15 Remote ON/OFF Control
(*8) - Possible (Short : ON, Open : OFF)
16 Parallel Operation
- -----
17 Series Operation
19 Operating Temperature
20 Operating Humidity
(∗8) -
(∗6) -
-
Possible
-20 ~ +85°C (Baseplate) Ambient Temperature min = -20°C
30 ~ 95%RH (No dewdrop)
21 Storage Temperature
- -40 ~ +85°C
22 Storage Humidity
- 10 ~ 95%RH (No dewdrop)
23 Cooling
24 Temperature Coefficient
(∗7) - Conduction Cooled
- 0.02% / °C
25 Withstand Voltage
- Input - Baseplate : 2.5kVAC (20mA) for 1 minute.
Input - Output : 3.0kVAC (20mA) for 1 minute.
Output - Baseplate : 500VDC for 1 minute.
26 Isolation Resistance
27 Vibration
- More than 100MΩ at 25°C and 70%RH Output - Baseplate : 500VDC
- At no operating, 10 ~ 55Hz amplitude (sweep for 1minute)
0.825mm constant (Maximum 5G) X,Y,Z 1hour each.
28 Shock
- Less than 20G (In Package)
29 Safety Standard
UL1950 - Approved by UL (excluding PH150S280-3.3)
CSA234 - Approved by CSA (excluding PH150S280-3.3)
EN60950 - Approved by BSI (excluding PH150S280-3.3)
30 Weight (Typ)
g 150g
31 Size (WxHxD)
mm 72 x 12.7 x 86 (Refer to Outline Drawing)
* Read instruction manual carefully, before using the power supply unit.
=NOTES=
∗1. At 280VDC and maximum output current.
∗2. 200 ~ 400VDC input, constant load.
∗3. No load ~ Full load, constant input voltage.
∗4. Constant current limiting with automatic recovery.
∗5. Inverter shut-down method, manual reset.
∗6. Ratings - Refer to Derating Curve on the right.
- Load (%) is percent of maximum output current.
∗7. Heatsink has to be chosen according to instruction manual.
∗8. Refer to instruction manual.
∗9. External components are needed for operation.
(Refer to basic connection and instruction manual)
Derating Curve
100
80
60
40
20
0 85
-20 0 20 40 60 80 100
Baseplate Temperature (°C)
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet PH150S280.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PH150S280 | PH150S280 Power Module | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |