DataSheetWiki


SY100EL90V fiches techniques PDF

Micrel Semiconductor - 5V/3.3V TRIPLE ECL/LVECL-TOPECL/ LVPECL TRANSLATOR

Numéro de référence SY100EL90V
Description 5V/3.3V TRIPLE ECL/LVECL-TOPECL/ LVPECL TRANSLATOR
Fabricant Micrel Semiconductor 
Logo Micrel Semiconductor 





1 Page

No Preview Available !





SY100EL90V fiche technique
5V/3.3V TRIPLE ECL/LVECL-TO-
PECL/LVPECL TRANSLATOR
SY100EL90V
FEATURES
s 3.3V and 5V power supply options
s 500ps propagation delay
s Fully differential design
s Supports both standard and low voltage operation
s Available in 20-pin SOIC package
PIN CONFIGURATION/BLOCK DIAGRAM
VCC 1
D0 2
D0 3
VBB 4
D1 5
D1 6
VBB 7
D2 8
D2 9
VEE 10
20 VCC
19 Q0
18 Q0
17 GND
16 Q1
15 Q1
14 GND
13 Q2
12 Q2
11 VCC
DESCRIPTION
The SY100EL90V is a triple ECL/LVECL-to-PECL/
LVPECL translator. The device can translate over all
combinations of supply voltages: -5V ECL to 5V PECL,
-5V ECL to 3.3V LVPECL, -3.3V LVECL to 5V PECL or
-3.3V LVECL to 3.3V LVPECL.
A VBB output is provided for interfacing with single
ended ECL signals at the input. If a single ended input is
to be used, the VBB output should be connected to the D
input. The active signal would then drive the D input.
When used, the VBB output should be bypassed to via a
0.01µF capacitor. The VBB output is designed to act as
the switching reference for the EL90V under single ended
input switching conditions. As a result this pin can only
source/sink up to 0.5mA of current.
To accomplish the level translation the EL90V requires
three power rails. The VCC supply should be connected
to the positive supply, and the VEE pin should be
connected to the negative power supply. The GND pins
as expected are connected to the system ground plane.
Both VEE and VCC should be bypassed to ground via
0.01µF capacitors.
Under open input conditions, the D input will be biased
at VCC/2 and the D input will be pulled to VEE. This
condition will force the Q output to a LOW, ensuring
stability.
PIN NAMES
Pin
Dn
Qn
VBB
Function
ECL/LVECL Inputs
PECL/LVPECL Outputs
ECL/LVECL Reference Voltage Output
SOIC
TOP VIEW
FUNCTION TABLE
Function
–5V ECL to 5V PECL
–5V ECL to 3.3V LVPECL
–3.3V LVECL to 5V PECL
–3.3V LVECL to 3.3V LVPECL
VCC
5V
3.3V
5V
3.3V
GND
0V
0V
0V
0V
VEE
–5V
–5V
–3.3V
–3.3V
Rev.: F
Amendment: /1
1 Isse Date: October, 1998

PagesPages 4
Télécharger [ SY100EL90V ]


Fiche technique recommandé

No Description détaillée Fabricant
SY100EL90V 5V/3.3V TRIPLE ECL/LVECL-TOPECL/ LVPECL TRANSLATOR Micrel Semiconductor
Micrel Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche