DataSheetWiki


DIG-11-06-xxx fiches techniques PDF

Dionics - (DIG-1x) OPTO Isolated Photovoltaic ISO Gate MOSFET Drivers

Numéro de référence DIG-11-06-xxx
Description (DIG-1x) OPTO Isolated Photovoltaic ISO Gate MOSFET Drivers
Fabricant Dionics 
Logo Dionics 





1 Page

No Preview Available !





DIG-11-06-xxx fiche technique
DIONICS, INmC.65 Rushmore Street
.coWestbury, NY 11590
Phone: (516) 997-7474
Fax: (516) 997-7479
Website: www.dionics-usa.com
et4UOPTO-ISOLATED PHOTOVOLTAIC ISO-GATETM MOSFET DRIVERS
heDIG-11-06-030
taSDIG-11-06-150
a DIG-11-08-050
.D DIG-12-06-025
DIG-12-08-010
DIG-12-08-045
DIG-12-06-100
DIG-12-06-250
wFeatures:
w¾ Completely Isolated Voltage Signal Generation
w¾ Dielectrically Isolated
m¾ Logic Circuit Compatibility
¾ High Open Circuit Voltage
o¾ High Operating Temperature
.c¾ Fast Response Time
¾ High Isolation Resistance
¾ Excellent Input/Output Linearity
U¾ Self Limiting Gate Voltage
Applications:
¾ Gate Drive For MOS devices
¾ Gate Drive For SCR
¾ Solid-State Relays
¾ Interface Between Logic Circuits & External Loads
¾ A.T.E. (Automatic Test Equipment)
¾ Switching Equipment
¾ Isolation Amplifiers
¾ Load Control From Microprocessor I/O Ports
¾ Thermocouple Open Detectors
t4Description:
eThe photovoltaic MOSFET driver is a State-of- the-Art, optically coupled floating power source used primarily to control
eMOSFETs when electrical isolation between input and output is required. The ISO-GATETM is a state-of-the-art opto-
isolator incorporating DIONICS’ photovoltaic (PV) diode arrays and an infrared LED. The diode array is a unique I.C.
hconsisting of series-connected photovoltaic diodes. The diodes are completely isolated from each other and from their
Scommon substrate by means of SiO2 Dielectric Isolation (DI). These photovoltaic output chips are electrically isolated but
optically coupled to the LED.
taThe typical input circuit to the LED is a limiting resistor connected in series with the LED. When activated, the LED
aemits infrared light towards the photovoltaic diode array, which then responds by generating an open circuit voltage
(Voc). This Voc is floating and is therefore completely isolated. The Voc value depends on the LED input drive and load
.Dimpedance. DIONICS, Inc offers a wide variety of package styles including low-cost plastic Mini-DIP’s, high reliability
TO-5 metal cans, 8-pin ceramic side brazed DIP’s and ceramic chip carriers for hybrid manufacturers. Other custom
packages and custom designs are also available.
wo Group I: DIG-11-06-030; DIG-11-06-150; DIG-11-08-050.
wo Group II: DIG-12-06-025; DIG-12-06-100; DIG-12-06-250; DIG-12-08-010; DIG-12-08-045.
w om™ Package Layout:
.c0.380
0.380
t4UDIG-11
e06-030
hexxxx
0.020
DIG-12
08-045
xxxx
0.020
www.DataS0.025
0.070
0.025
0.070
™ Pin Designation
Pin Number
Group I
Group II
1
Input +
Input +
2
Input -
Input -
3 Not Connected Not Connected
4 Not Connected Not Connected
5 Not Connected Output1+
6
Output +
Output1-
7 Not Connected Output2+
8
Output -
Output2-
08/2004

PagesPages 4
Télécharger [ DIG-11-06-xxx ]


Fiche technique recommandé

No Description détaillée Fabricant
DIG-11-06-xxx (DIG-1x) OPTO Isolated Photovoltaic ISO Gate MOSFET Drivers Dionics
Dionics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche