D17CL Datasheet PDF - Hansol
| Part Number | D17CL | |
| Description | Manual | |
| Manufacturers | Hansol | |
| Logo |  |
|
|
There is a preview and D17CL download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
FCC Information
This equipment has been tested and found to comply with limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment can generates, uses, and radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inteference to radio
Communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause unacceptable interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
DECLARATION OF CONFORMITY
PRODUCT NAME : 17" COLOR MONITOR
MODEL NUMBER : D17CL
FCC RULES : TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT : FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT :
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions : (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
HANSOL MULTITECH, INC.
7001, VILLAGE DRIVE, SUITE 255, BUENA PARK, CA. 90621, USA
TEL : (714)562-5151
2 User’s Manual
Introduction
Package
Safety Information
Features
Power management system
Installation
Connection to your personal computer.
Pin assignment table D-sub mini 15 pin connector
Controls
OSD Controls
OSD Menus
Troubleshooting
No picture
Image is scrolling or unstable
Picture is fuzzy
Picture bounces or a waving pattern is present in the picture
Edges of the display image are not square
Display image is not centered, too small, or too large
Specifications
Electrical specifications
Mechanical specifications
Environmental specifications
Appendix
Preset Timings
4
4
5
6
7
7
8
9
12
12
12
12
12
12
13
13
13
14
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Notice
The information contained in this document is subject to change without notice.
User’s Manual
3
|
| |
 
Controls
OSD MENU
8. MOIRE
MOIRE CONTROL
H. MOIRE ADJUST
V. MOIRE ADJUST
50
9. LANGUAGE
LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
PRESS MENU KEY
MENU
+
Odd press
Contros the amount of selected Exit to No.2
: Selects and blinks the function. Please control these key
function with RED ICON in order the image not to shiver.
Even press
: Stops blinking and
ready to move function
you want.
Moves to function you want.
Selects the languages Moves to language you want.
with RED ICON and
Exit to No.2
Exit to No.2
10. OSD POSITION
OSD H.POSITION
50
Toggles OSD position Moves the OSD Moves the OSD Exit to No.2
horizontally or vertically. menu left or menu right or
down in the up in the
selected
selected
function.
function.
11. COLOR MODE
COLOR - TEMP
Odd press
Moves to color mode you want Exit to No.1
: Blinks the RED ICON and the selected “color mode”
- color menu ICON. will blink.
USER
6500K
9300K
Even press
: Stops blinking and
ready to move function
you want.
Moves to function you want.
Exit to No.1
When the color mode
_
_
_
ICON is blinking in user
mode, press, then go to
color adjust mode
No.12.
12. COLOR ADJUST
MODE
RB GB BB RG GG BG
USER
50
RB - Red background raster
GB - Green background raster
BB - Blue background raster
RG - Red level gain
GG - Green level gain
BG - Blue level gain
Odd press
Controls the amount of function Exit to No.11
: Selects and blinks the you want.
function you want.
Even press
: Stops blinking and
ready to move function
you want.
Moves to the function you want.
Exit to No.11
10 User’s Manual
Controls
OSD MENU
13. ZOOM
ZOOM
50
MENU
Odd press
: Selects zoom and
blinks the zoom ICON.
Shinks the
image
horizontally
and vertically.
+
Expands the
image
horizontally
and vertically.
Exit to No.1
Even press
: Stops blinking and
ready to move anther
function.
Moves to the function you want. Exit to No.1
Recall (
) : Recall control to the factory setting resets all the controls within the all menu.
If you want to return to the factory mode setting, press Recall key 5~8 Sec
continuously.
Degauss (
) : Eliminates the build-up of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus, and
convergence. When pressed, you screen image will jump and waver a bit as the
screen is demagnetized.
Caution
: Please allow aminimum of 20 minutes to elapse between uses of the Degauss
button. Do not hold the button down continuously to avoid decreasing the life the
Deguass circuitry.
Geometry Controls Menu
GEOMETRY
PINCUSHION
PARALLELOGRAM
TRAPEZOID
PINBALANCE
ROTATION
50%50
The Geometry controls allow you to adjust the curvature or angle
of the sides of you display.
Pincushion : Increases or decreases the curvature of the sides either inward or outward.
Parallelogram : Increases or decreases the tilt of the sides either to the left or right.
Trapezoid : Increases or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increases or decreases the curvature of the sides either to the left or right.
Rotation
: Increases or decreases the tilt of the screen image relative to a horizontal line.
User’s Manual
11
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for D17CL electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ D17CL.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| D17CL | The function is Manual. Hansol | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
D17C
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||