DataSheetWiki


SI-3011ZD fiches techniques PDF

Allegro MicroSystems - High-Current / Low-Dropoiut / 1.1 - 5V Regulator

Numéro de référence SI-3011ZD
Description High-Current / Low-Dropoiut / 1.1 - 5V Regulator
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





SI-3011ZD fiche technique
( DataSheet : www.DataSheet4U.com )
LRinegeuarlators
SI-3011ZD
High-Current, Low-Dropout, 1.1~5 V Regulator
ABSOLUTE MAXIMUM RATINGS
Input Voltage, VI . . . . . . . . . . . . . 10 V
Output Current, IO . . . . . . . . . . . . . 3 A*
Enable Input Voltage, VE . . . . . . . . 6 V
Junction Temperature, TJ . . . . +125°C
Storage Temperature Range,
TS . . . . . . . . . . . . -40°C to +125°C
* Output current rating is limited by input
voltage, duty cycle, and ambient tempera-
ture. Under any set of conditions, do not
exceed a junction temperature of +125°C.
Designed to meet the high-current requirements in industrial and
consumer applications; embedded core, memory, or logic supplies; TVs,
VCRs, and office equipment, the SI-3011ZD voltage regulator offers the
reduced dropout voltage and low quiescent current essential for im-
proved efficiency. This device delivers a regulated output at up to 3 A.
Integrated thermal and overcurrent protection enhance overall system
reliability. Devices with fixed output voltages of 2.5 or 3.3 V are also
available.
Quiescent current does not increase significantly as the dropout
voltage is approached, an ideal feature in standby/resume power systems
where data integrity is crucial. Regulator accuracy and excellent
temperature characteristics are provided by a bandgap reference. An
LS-TTL/CMOS-compatible input gives the designer complete control
over power up, standby, or power down. A pnp pass element provides a
dropout voltage of less than 600 mV at 3 A of load current. Low output
voltages eliminate the need for expensive PWM buck converters. The
low dropout voltage permits more efficient regulation before output
regulation is lost.
This device is supplied in a 5-lead surface-mount plastic package
(TO-263) with ground tab to provide a low-resistance path for maximum
heat dissipation. A similar device in a flange-mounted (TO-220-style)
high-power package is the SI-3011ZF.
FEATURES
3 A Output Current
Adjustable 1.1~ 5 V Output Voltage
0.6 V Maximum Dropout Voltage at IO = 3 A
Fast Transient Response
1 µA Maximum Standby Current
Remote Voltage Sensing
Foldback Current Limiting
Ground Tab for Superior Heat Dissipation
Thermal Protection
APPLICATIONS
TVs, VCRs, Electronic Games
Embedded Core, Memory, or Logic Supplies
Printers and Other Office Equipment
Industrial Machinery
Secondary-Side Stabilization of Multi-Output SMPS
Always order by complete part number, e.g., SI-3011ZD-TL ,
where “-TL” indicates tape and reel.
www.DataSheet4U.com
Sanken Power Devices
from Allegro MicroSystems

PagesPages 9
Télécharger [ SI-3011ZD ]


Fiche technique recommandé

No Description détaillée Fabricant
SI-3011ZD High-Current / Low-Dropoiut / 1.1 - 5V Regulator Allegro MicroSystems
Allegro MicroSystems
SI-3011ZF High-Current / Low-Dropoiut / 1.1 - 5V Regulator Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche