|
|
Número de pieza | FT-1000MP | |
Descripción | Mark-V | |
Fabricantes | Yaesu | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de FT-1000MP (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Rigblaster Plus
and
Yaesu FT-1000 MP Mark V with Writelog Interfacing
Don Cassel VE3BUC
The problem with the Mark V and Rtty is to take advantage of the additional filtering available for
Rtty at the Packet jack on the rear panel. Using the standard mike input from the Rigblaster requires
that you use LSB and as a result does not take advantage of this filtering. Also you cannot select a
narrow CW filter when in LSB mode. Using the Packet jack requires you to press the PKT key on
the Mark V to operate AFSK Rtty which lights up both the PKT and LSB lights for that mode.
Although the Rtty jack and FSK could be used I chose to stay with the AFSK which has been quite
satisfactory in previous use. For modes such as PSK you can just press the USB button and use the
software for filtering. I also wanted to be able to use Writelog for CW send and receive in addition
to the digital modes.
Cabling
Two extra audio cables will be required that are not included with Rigblaster Plus. These are
used for audio to the Mark V packet connector and the CW key connector.
1. Set up the Rig Blaster as instructed in the manual. For the Mark V install the jumpers as
instructed for the Yaesu Mike. I’m using a Heil with the same settings.
2. Connect the mike as instructed in the Rigblaster manual. Run the mike cable from the
Rigblaster to the Mark V front connector and plug the mike into the Rigblaster front mike
connector.1
3. Connect the serial cable between the Rigblaster and the PC COM1.2
4. Connect an audio cable from PC Line Out to the Rigblaster Audio In.
5. Connect an audio cable from the PC Microphone jack to the Mark V AF Out.
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet FT-1000MP.PDF ] |
Número de pieza | Descripción | Fabricantes |
FT-1000MP | Mark-V Transceiver | Yaesu |
FT-1000MP | Mark-V | Yaesu |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |