|
|
Número de pieza | AM8TW-I | |
Descripción | 8 watt dc-dc converters | |
Fabricantes | AIMTEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AM8TW-I (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Models
AM8TW-I Series
8 watt dc-dc converters
• 24PIN DIP PACKAGE
• REGULATED OUTPUT
• METAL ENCAPSULATED CASE
• LOW RIPPLE & NOISE
• POWER MODULES FOR PCB MOUNTING
• OPERATING TEMPERATURE : -40…+75°C
Input Volta•g4e:1 WIDE INPUOT RuApNuGtEVoltage
Ouput Current max.
GENERAL DESCRIPTION
Our AM8TW-I series is a family of cost effective
8W single and dual output DC-DC converters.
These converters are DIP24 compatible metal case
with dimensions of 31.8x20.3x10.2mm. The high
performance features of our AM8TW-I components
include continuous short circuit protection with
auto recovery, tight line regulation and a high effi-
ciency operation coefficient up to 84%.
These wide range devices operate over 4:1 input
voltage range, providing a continuously stable out-
put voltage. Fourteen models operate from an input
voltage range of 24 & 48VDC producing output
voltages of 3.3, 5, 12, 15, ±5, ±12 & ±15VDC. The
normal operation is specified over the full operating
temperature range of -40°C to +75°C with no derat-
ing required. Cooling is done by free air convec-
tion.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
24VDC, 9~36VDC
48VDC, 18~75VDC
π (Pi) Network
Isolation Specifications:
Rated voltage
Resistance
Capacitance
1500VDC
>1000 Mohms
1000pF, typ.
General Specifications:
Efficiency
Switching frequency
76% to 84%
300KHz, typ. 100% load
Environmental Specifications:
Operating temperature
-40°C …+75°C
Storage temperature
-55°C …+115°C
Case temperature
+95°C, max.
Humidity (non-condensing) Up to 95%
Cooling
Free-air convection
Output Specifications:
Voltage accuracy
±2%, max.
Ouput Current max.
Ripple Noise (3.3,5V) 80m Vp-pmax
Ripple Noise other
1% P-P max
Short circuit protection Continuous, auto-recovery
Over load protection Over 110% full load
and recovers automatically
Over Voltage Protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%) single ±0.5%, max., dual ±2%
Temperature coefficient ±0.05%/°C, max.
Physical Specifications:
Dimensions
31.8x20.3x10.2mm,
tolerance ±0.5mm
1.25x0.8x0.4inches
Weight
18g
Case material
Nickel-Coated Copper
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
Continued on next page
DataSheet4 U .com
TO ORDER CALL 1-888-9-AIMTEC
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet AM8TW-I.PDF ] |
Número de pieza | Descripción | Fabricantes |
AM8TW-C | 8 watt dc-dc converters | AIMTEC |
AM8TW-I | 8 watt dc-dc converters | AIMTEC |
AM8TW-IZ | DC-DC Converter | AIMTEC |
AM8TW-Z | DC-DC Converter | AIMTEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |