DataSheetWiki


AM30K-I fiches techniques PDF

AIMTEC - 30 watt dc-dc converters

Numéro de référence AM30K-I
Description 30 watt dc-dc converters
Fabricant AIMTEC 
Logo AIMTEC 





1 Page

No Preview Available !





AM30K-I fiche technique
www.DataSheet4U.com
AM30K-I Series
30 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
TERMAL SHUTDOWN
REMOTE ON - OFF CONTROL
SOFT START
HIGH EFFICIENCY
STANDARD PACKAGE
UVLO / OVLO SHUTDOWN
GENERAL DESCRIPTION
Our AM30K-I series is a family of cost effective 30W output
DC-DC converters. These converters are shielded on all six sides
and encapsulated with a nickel-coated copper with a non-conduc-
tive base and dimensions of 50.8x40.64x10.8mm. The high per-
formance features of our AM30K-I components include continu-
ous short circuit protection with auto recovery, tight line regulation
and a high efficiency operation coefficient up to 88%.
Twenty one models operate from an input voltage of 12,
24 & 48VDC producing output voltages of 3.3, 5, 12, 15,
±5, ±12, & ±15VDC. The normal operation is specified
over the full operating temperature range of -40°C to
+75°C with no derating required. Cooling is done by free
air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range (2:1)
Filter
12VDC, 9~18VDC
24VDC, 18~36VDC
48 VDC, 36~75VDC
π (Pi) Network
Isolation Specifications:
Rated voltage
Resistance
Capacitance
1500VDC
>1000 Mohms
1000pF
General Specifications:
Efficiency
Switching frequency
81% to 88%
250KHz, typ. 100% load
Environmental Specifications:
Operating temperature
-40°C …+75°C
Storage temperature
-55°C …+115°C
Case temperature
+100°C, max.
Humidity (non-condensing) Up to 95%
Cooling
Free-air convection
Output Specifications:
Voltage accuracy
±2%, max.
Ripple Noise (3.3 & 5V) 80m Vp-pmax
Ripple Noise (Others) 1% P-Pmax (Vp-p)
Short circuit protection Continuous, auto-recovery
Over current protection Over 110% of full load
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, max.
Load regulation (10-100%)Single ±0.5%, max., dual ±2%, max.
Temperature coefficient ±0.05%/°C, max.
Physical Specifications:
Dimensions
50.8x40.6x10.2mm,
2.0x1.6x0.4inches
Weight
50g
Case material
Nickel-Coated Copper
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
DataSVheIeSt4ITU.cUomS AT WWW.AIMTEC.CA
Continued on next page

PagesPages 3
Télécharger [ AM30K-I ]


Fiche technique recommandé

No Description détaillée Fabricant
AM30K-C 30 watt dc-dc converters AIMTEC
AIMTEC
AM30K-I 30 watt dc-dc converters AIMTEC
AIMTEC
AM30K-IZ DC-DC Converter AIMTEC
AIMTEC
AM30K-NZ DC-DC Converter AIMTEC
AIMTEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche