DataSheetWiki


AT89C51RC2 fiches techniques PDF

ATMEL Corporation - 8-bit Microcontroller

Numéro de référence AT89C51RC2
Description 8-bit Microcontroller
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





AT89C51RC2 fiche technique
Features
80C52 Compatible
– 8051 Pin and Instruction Compatible
– Four 8-bit I/O Ports
– Three 16-bit Timer/Counters
– 256 Bytes Scratch Pad RAM
– 9 Interrupt Sources with 4 Priority Levels
– Dual Data Pointer
Variable Length MOVX for Slow RAM/Peripherals
ISP (In-system Programming) Using Standard VCC Power Supply
Boot ROM Contains Low Level Flash Programming Routines and a Default Serial
Loader
High-speed Architecture
– In Standard Mode:
40 MHz (Vcc 2.7V to 5.5V, both Internal and external code execution)
60 MHz (Vcc 4.5V to 5.5V and Internal Code execution only)
– In X2 mode (6 Clocks/machine cycle)
20 MHz (Vcc 2.7V to 5.5V, both Internal and external code execution)
30 MHz (Vcc 4.5V to 5.5V and Internal Code execution only)
– 16K/32K Bytes On-chip Flash Program/Data Memory
– Byte and Page (128 Bytes) Erase and Write
– 100K Write Cycles
On-chip 1024 Bytes Expanded RAM (XRAM)
– Software Selectable Size (0, 256, 512, 768, 1024 Bytes)
– 256 Bytes Selected at Reset for TS87C51RB2/RC2 Compatibility
Keyboard Interrupt Interface on Port P1
SPI Interface (Master/Slave Mode)
8-bit Clock Prescaler
Improved X2 Mode with Independent Selection for CPU and Each Peripheral
Programmable Counter Array 5 Channels
– High-speed Output
– Compare/Capture
– Pulse Width Modulator
– Watchdog Timer Capabilities
Asynchronous Port Reset
Full Duplex Enhanced UART
Dedicated Baud Rate Generator for UART
Low EMI (Inhibit ALE)
Hardware Watchdog Timer (One-time Enabled with Reset-out)
Power Control Modes
– Idle Mode
– Power-down Mode
– Power-off Flag
Power Supply:
– 2.7 to 3.6 (3V Version)
– 2.7 to 5.5V (5V Version)
Temperature Ranges: Commercial (0 to +70°C) and Industrial (-40°C to +85°C)
Packages: PDIL40, PLCC44, VQFP44
8-bit
Microcontroller
with 16K/
32K Bytes Flash
AT89C51RB2
AT89C51RC2
Description
The AT89C51RB2/RC2 is a high-performance Flash version of the 80C51 8-bit micro-
controllers. It contains a 16K or 32K Bytes Flash memory block for program and data.
The Flash memory can be programmed either in parallel mode or in serial mode with
the ISP capability or with software. The programming voltage is internally generated
from the standard VCC pin.
Rev. 4180E–8051–10/06

PagesPages 30
Télécharger [ AT89C51RC2 ]


Fiche technique recommandé

No Description détaillée Fabricant
AT89C51RC 8-bit Microcontroller ATMEL Corporation
ATMEL Corporation
AT89C51RC2 8-bit Microcontroller ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche