DataSheetWiki


AT28HC256N fiches techniques PDF

ATMEL Corporation - High-speed Parallel EEPROM

Numéro de référence AT28HC256N
Description High-speed Parallel EEPROM
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





AT28HC256N fiche technique
www.DataSheet4U.com
Features
Fast Read Access Time – 90 ns
Automatic Page Write Operation
– Internal Address and Data Latches for 64 Bytes
– Internal Control Timer
Fast Write Cycle Times
– Page Write Cycle Time: 3 ms Maximum
– 1 to 64-byte Page Write Operation
Low Power Dissipation: 300 µA Standby Current (CMOS)
Hardware and Software Data Protection
DATA Polling for End of Write Detection
High Reliability CMOS Technology
– Endurance: 105 Cycles
– Data Retention: 10 Years
Single 5V ±10% Supply
CMOS and TTL Compatible Inputs and Outputs
JEDEC Approved Byte-wide Pinout
Description
The AT28HC256N is a high-performance electrically erasable and programmable read
only memory. Its 256K of memory is organized as 32,768 words by 8 bits. Manufac-
tured with Atmel’s advanced nonvolatile CMOS technology, the AT28HC256N offers
access times to 90 ns with power dissipation of just 440 mW. When the AT28HC256N
is deselected, the standby current is less than 3 mA.
The AT28HC256N is accessed like a Static RAM for the read or write cycle without the
need for external components. The device contains a 64-byte page register to allow
writing of up to 64 bytes simultaneously. During a write cycle, the address and 1 to 64
bytes of data are internally latched, freeing the addresses and data bus for other oper-
ations. Following the initiation of a write cycle, the device will automatically write the
latched data using an internal control timer. The end of a write cycle can be detected
by DATA Polling of I/O7. Once the end of a write cycle has been detected a new
access for a read or write can begin.
Atmel’s AT28HC256N has additional features to ensure high quality and manufactura-
bility. The device utilizes internal error correction for extended endurance and
improved data retention characteristics. An optional software data protection mecha-
nism is available to guard against inadvertent writes. The device also includes an extra
64 bytes of EEPROM for device identification or tracking.
Pin Configurations
Pin Name
A0 - A14
CE
OE
WE
I/O0 - I/O7
NC
Function
Addresses
Chip Enable
Output Enable
Write Enable
Data Inputs/Outputs
No Connect
LCC, PLCC
Top View
A6 5
A5 6
A4 7
A3 8
A2 9
A1 10
A0 11
NC 12
I/O0 13
29 A8
28 A9
27 A11
26 NC
25 OE
24 A10
23 CE
22 I/O7
21 I/O6
256 (32K x 8)
High-speed
Parallel
EEPROM
AT28HC256N
3446B–PEEPR–4/04

PagesPages 13
Télécharger [ AT28HC256N ]


Fiche technique recommandé

No Description détaillée Fabricant
AT28HC256 256K (32K x 8) High-speed Parallel EEPROM ATMEL Corporation
ATMEL Corporation
AT28HC256N High-speed Parallel EEPROM ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche