|
|
PDF ATA5590 Data sheet ( Hoja de datos )
| Número de pieza | ATA5590 | |
| Descripción | 1-kbit UHF R/W IDIC | |
| Fabricantes | ATMEL Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ATA5590 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Features
• Backscatter-based UHF RFID IC (860 Mhz to 960 Mhz) Supporting Current and Future
Radio Regulations
• Support for All Data Structures Defined in ISO/IEC 18000-6, ISO/IEC 15961,
ISO/IEC 15963, GTAG, ePC
• ATA5590 is a Passive Backscatter-communication-based Data Carrier IC
– 12 µW RF Power Required for Minimum Communication Feasibility
• Programming of the Memory Possible in Atomic and Global Mode
– Dynamic Programming Time Management
– Programming Range: 80% of the Read Space
• Programmable EAS Functionality
• Double-edge PIE Encoding
• Short, Long and Temporary Commands
• PSK for the Backscatter Data Stream to Achieve Highest SNR
• Full-duplex and Half-duplex Communication Modes
• Synchronous Return Link to Achieve Highest SNR
• ATA5590 Enables Several Closed-loop Possibilities to Enable:
– Adaptive Speed During Read and Anticollision Procedures
– Fast Programming
• Communication Speed 5 Kbit/s to 60 Kbit/s, Fully Controlled by the Reader
– Different Speed Factors Possible in Forward and Return Link
• Two Kinds of Anticollision Procedures Implemented
– Deterministic and Slotted Aloha Anticollision Procedure
– Group_Selection Commands Supporting = < > Decisions
– Wakeup Commands
– All Procedures Support 16-Bit Random Values for Access Control Mechanisms
• No Unique Data Structures are Needed to Enable Both Anticollision Procedures
– Parallel Handling of Different Structures and Opening of Migration Paths for
Private Structures
– Applications in Open Data Systems as well as in Closed Systems
– Maximum ID is Limited Only by the User Memory Space (1024 Bits + 256 Bits)
• Both Procedures Also Support Virgin-tag Initialization During Anticollision
• High-efficiency Commands to Increase and Adapt Anticollision Speed
1-kbit UHF
R/W IDIC® with
Anti-collision
Function
ATA5590
TAGIDU™
Summary
Preliminary
1. Overview
ATA5590 is a wireless data carrier IC. The IC is powered by the RF field transmitted
by an RFID reader. The carrier frequency is typically in the UHF region (860 MHz to
960 MHz).
The functionality of the IC is controlled by the reader.
The IC backscatters the required information back to the reader using a backscatter
modulation technique; it is a passive UHF Transponder device based on the experi-
ence of the EU-funded project Palomar (IST1999-10339).
ATA5590 was created to enable applications for open data management systems
also supporting old or private data structures.
Rev. 4817DS–RFID–12/05
Note: This is a summary document. A complete document
is available under NDA. For more information, please con-
tact your local Atmel sales office.
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet ATA5590.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ATA5590 | 1-kbit UHF R/W IDIC | ATMEL Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |