|
|
PDF JM1AN Data sheet ( Hoja de datos )
| Número de pieza | JM1AN | |
| Descripción | COMPACT POWER RELAY | |
| Fabricantes | Nais | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de JM1AN (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
VDE
COMPACT POWER RELAY
JM-RELAYSFOR INDUCTIVE LOAD
30.4
1.197
16
.630
26.5
1.043
28.5
1.122
31
1.220
Slim TMP type
16.8
.661
28.5
1.122
17.2
.677
31
1.220
Flat TM type
Flat TMP type
mm inch
FEATURES
• Compact, high-capacity, and resis-
tant to inductive loads
The relay is a compact 16×30.4×26.5 mm
.630×1.197×1.043 inch. It can control an
inductive load (cosϕ = 0.7) with inrush
current of 70 A and steady state current of
20 A.
• Excellent contact welding resistance
High contact pressure, a forced opening
mechanism, and a forced wiping
mechanism realizes an excellent contact
welding resistance.
• High breakdown voltage and surge
resistant relay
More than 6.4 mm .252 inch maintained
for the insulation distance between con-
tacts and coil, and the breakdown voltage
between contacts and coil is 5,000 V for 1
minute. In addition, the surge resistance
between contacts and coil is greater than
10,000 V.
• Resistant to external force
An absorber mechanism is used on the
load terminals, giving a large improve-
ment in characteristics variations caused
by the external force during FASTON
placement/removal.
• Flux resistance mechanism
The terminal area is plugged with resin to
prevent flux seepage during PCB mount-
ing. (TMP type)
• Conforms to the various safety stan-
dards
UL, CSA approved.
TÜV, VDE under application.
• The line up can support economical
mounting methods.
The relay are equipped with a drive termi-
nal (coil terminal) on one side for PCBs,
and a load terminal (tab terminal #250) on
the reverse side. The line up includes the
TM type which can be attached directly to
the PCB composing a drive circuit, and
the TMP type which supports economical
wiring. The TMP type can also be directly
attached, and a high capacity load can be
wired to the tab terminal.
SPECIFICATIONS
Contact
Arrangement
1 Form A
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
30 mΩ
(Cd free type: 100 mΩ)
Contact material
Silver alloy
Rating
(resistive
load)
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
20 A 250 V AC
5,000 VA
250 V AC
20 A
Mechanical (at 180 cpm)
106
Resistive load 20 A, 250
V AC (cosϕ = 1)
105
Expected
life (min.
ope.)
Electrical
Life
(at 20 cpm) Inductive
load
Inrush 70 A, Steady
20 A (250 V AC
cosϕ = 0.7)
Inrush 80 A, Cut-off
80 A (When the
motor is locked) (250
V AC cosϕ = 0.7)
105
1.5×103
Coil
Nominal operating power
900 mW
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section
*2 Detection current: 10mA
*3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*4 Excluding contact bounce time
*5 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*6 Half-wave pulse of sine wave: 6ms
*7 Detection time: 10µs
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 24).
Characteristics
Max. operating speed
180 cpm
Initial insulation resistance*1
Min. 100 MΩ (at 500 V DC)
Initial
breakdown
voltage*2
Between open
contacts
Between con-
tacts
and coil
1,000 Vrms for 1 min.
5,000 Vrms for 1 min.
Surge voltage between con-
tact and coil*3
Min. 10,000 V
Operate time*4
(at nominal voltage)(at 20°C)
Max. 20ms (Approx. 8 ms)
Release time (without diode)*4
(at nominal voltage)(at 20°C)
Max. 10ms (Approx. 3 ms)
Temperature rise (at 60°C)
Max. 55°C (Contact switching current:
20 A/voltage applied to coil: 100%V)
Shock
Functional*5
resistance Destructive*6
Min. 98 m/s2 {10 G}
Min. 980 m/s2 {100 G}
Vibration
resistance
Functional*7
Destructive
10 to 55 Hz at double
amplitude of 1.6 mm
10 to 55 Hz at double
amplitude of 2 mm
Conditions for operation, Ambient
transport and storage*8 temp.
(Not freezing and condens-
ing at low temperature) Humidity
–40°C to +60°C
–40°F to +140°F
5 to 85% R.H.
Slim TMP
Approx. 28 g .99 oz
Unit weight Flat TMP
Approx. 32 g 1.13 oz
Flat TM
Approx. 33 g 1.16 oz
114
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet JM1AN.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| JM1AN | COMPACT POWER RELAY | Nais |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |