WM8152 Datasheet PDF - Wolfson Microelectronics
| Part Number | WM8152 | |
| Description | Single Channel 16-bit CIS/CCD AFE | |
| Manufacturers | Wolfson Microelectronics | |
| Logo |  |
|
|
There is a preview and WM8152 download ( pdf file ) link at the bottom of this page. Total 26 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.com
WM8152
Single Channel 16-bit CIS/CCD AFE with 4-bit Wide Output
DESCRIPTION
The WM8152 is a 16-bit analogue front end/digitiser IC
which processes and digitises the analogue output signals
from CCD sensors or Contact Image Sensors (CIS) at pixel
sample rates of up to 12MSPS.
The device includes a complete analogue signal processing
channel containing Reset Level Clamping, Correlated
Double Sampling, Programmable Gain and Offset adjust
functions. Internal multiplexers allow fast switching of offset
and gain for line-by-line colour processing. The output from
this channel is time multiplexed into a high-speed 16-bit
Analogue to Digital Converter. The digital output data is
available in 4-bit wide multiplexed format.
An internal 4-bit DAC is supplied for internal reference level
generation. This may be used to reference CIS signals or
during Reset Level Clamping to clamp CCD signals. An
external reference level may also be supplied. ADC
references are generated internally, ensuring optimum
performance from the device.
Using an analogue supply voltage of 5V, a digital core
voltage of 5V, and a digital interface supply of either 5V or
3.3V, the WM8152 typically only consumes 225mW when
operating from a single 5V supply.
BLOCK DIAGRAM
FEATURES
• 16-bit ADC
• 12MSPS conversion rate
• Low power - 225mW typical
• 5V single supply or 5V/3.3V dual supply operation
• Single channel operation
• Correlated double sampling
• Programmable gain (8-bit resolution)
• Programmable offset adjust (8-bit resolution)
• Programmable clamp voltage
• 4-bit wide multiplexed data output format
• Internally generated voltage references
• 20-pin SSOP package
• Serial control interface
APPLICATIONS
• Flatbed and sheetfeed scanners
• USB compatible scanners
• Multi-function peripherals
• High-performance CCD sensor interface
VSMP MCLK
AVDD DVDD1 DVDD2
VRT VRX VRB
CL RS VS TIMING CONTROL
VREF/BIAS
VINP
VRLC/VBIAS
RLC
CDS
RLC 4
DAC
WOLFSON MICROELECTRONICS plc
w :: www.wolfsonmicro.com
RM
GU
X
8
OFFSET
DAC
B
RM
GU
X
B
+ PGA
I/P SIGNAL
8 POLARITY
ADJUST
+
W
WM8152
16-
BIT
ADC
DATA
I/O
PORT
OP[0]
OP[1]
OP[2]
OP[3]/SDO
CONFIGURABLE
SERIAL
CONTROL
INTERFACE
SEN
SCK
SDI
AGND1
AGND2
DGND
Production Data, January 2004, Rev 4.0
Copyright 2004 Wolfson Microelectronics plc
|
| |
 
Production Data
WM8152
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at
or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical
Characteristics at the test conditions specified.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible
to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage
of this device.
Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage
conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at <30°C / 85% Relative Humidity. Not normally stored in moisture barrier bag.
MSL2 = out of bag storage for 1 year at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
MSL3 = out of bag storage for 168 hours at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
The Moisture Sensitivity Level for each package type is specified in Ordering Information.
CONDITION
MIN MAX
Analogue supply voltage: AVDD
GND - 0.3V
GND + 7V
Digital core voltage: DVDD1
GND - 0.3V
GND + 7V
Digital IO supply voltage: DVDD2
GND - 0.3V
GND + 7V
Digital ground: DGND
GND - 0.3V
GND + 0.3V
Analogue grounds: AGND1 − 2
GND - 0.3V
GND + 0.3V
Digital inputs, digital outputs and digital I/O pins
GND - 0.3V
DVDD2 + 0.3V
Analogue input (VINP)
GND - 0.3V
AVDD + 0.3V
Other pins
GND - 0.3V
AVDD + 0.3V
Operating temperature range: TA
Storage temperature after soldering
Package body temperature (soldering, 10 seconds)
0°C
-65°C
+70°C
+150°C
+260°C
Package body temperature (soldering, 2 minutes)
+183°C
Notes:
1. GND denotes the voltage of any ground pin.
2. AGND1, AGND2 and DGND pins are intended to be operated at the same potential. Differential voltages
between these pins will degrade performance.
RECOMMENDED OPERATING CONDITIONS
CONDITION
SYMBOL
MIN
TYP
MAX
UNITS
Operating temperature range
TA 0
70 °C
Analogue supply voltage
AVDD
4.75
5.0
5.25
V
Digital core supply voltage
DVDD1
4.75
5.0
5.25
V
Digital I/O supply voltage
5V I/O
DVDD2
4.75
5.0
5.25
3.3V I/O
DVDD2
2.97
3.3
3.63
V
V
w
PD Rev 4.0 January 2004
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for WM8152 electronic component. |
| Information | Total 26 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ WM8152.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| WM8150 | The function is SINGLE CHANNEL 12 BIT CIS/CCD AFE WITH 4 BIT WIDE OUTPUT. Wolfson Microelectronics plc |  |
| WM8152 | The function is Single Channel 16-bit CIS/CCD AFE. Wolfson Microelectronics | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
WM81
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||