|
|
PDF 735P Data sheet ( Hoja de datos )
| Número de pieza | 735P | |
| Descripción | Metalized Polypropylene | |
| Fabricantes | Vishay Siliconix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 735P (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Type 735P
Vishay Sprague
Film Capacitors
High Current, Wrap-and-Fill,
Metalized Polypropylene
FEATURES
• Wire or lug terminals
• High stability
• High ripple to 30 amperes
• Low inductance
• Low ESR
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 105°C.
Capacitance Range: 1.0µF to 30.0µF.
Capacitance Tolerance: ± 10%, ± 5%.
DC Voltage Rating: 100 WVDC to 400 WVDC.
Equivalent Series Resistance: 20kHz to 100kHz.
Dissipation Factor: 0.1% maximum.
Measure at 1000Hz @ + 25°C.
∆V/∆T: 10V/millisecond maximum.
Voltage Test: 200% of rated voltage for 2 minutes.
Insulation Resistance: Measure at 100 WVDC after a
2 minute charge.
At + 25°C: 200,000 Megohm - Microfarads, or 400,000
Megohm minimum.
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DC Life Test: 140% of rated voltage for 1000 hours
@ + 105°C. No visible damage. No open or short circuits.
Maximum ∆ CAP ± 1.0%.
Minimum IR = 50% of initial limit.
Maximum DF = 0.10%.
Humidity Test: 95% relative humidity @ + 40°C for 250
hours. No visible damage.
Maximum ∆ CAP ± 1.0%.
Maximum IR = 20% of initial limit.
Maximum DF = 0.12%.
PHYSICAL CHARACTERISTICS
Pull Test:
Wire Leads - 5 pounds (2.3 kilograms) for one minute.
No physical damage.
Terminal Lugs - 10 pounds (4.5 kilograms) for one minute.
No physical damage.
Lead Bend: After three complete consecutive bends,
no damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
DIMENSIONS in inches [millimeters]
1.750
[44.45]
Min.
L
± 0.062 [1.57]
Terminal Style L
1.750
[44.45]
Min.
D
Max.
Tinned Solid Copper Wire*
Tinned Solid Copper Lug
L1
± 0.062 [1.57]
L2
± 0.062 [1.57]
D Max. < 0.700 [17.78], No. 20 AWG wire 0.032 [0.812] nominal diameter.
D Max. ≥ 0.700 [17.78], No. 18 AWG wire 0.040 [1.016] nominal diameter.
Terminal Style H
0.360 ± 0.005
[9.14 ± 0.13]
D
Max.
L
± 0.062 [1.57]
0.156 ± 0.005 Dia.
[3.96 ± 0.13]
0.312 [7.9] Min.
0.032 ± 0.002
[0.81 ± 0.05]
L1 = L + 0.766 [19.46]
L2 = L + 0.437 [11.10]
* Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.78mm] from edge (Terminal Style L only).
www.vishay.com
94
For technical questions, contact [email protected]
Document Number: 42031
Revision 17-Nov-03
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet 735P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 735D | Wet Tantalum Capacitors | Vishay Siliconix |
| 735DE | Wet Tantalum Capacitors | Vishay Siliconix |
| 735P | Metalized Polypropylene | Vishay Siliconix |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |