DataSheetWiki


SW-106 fiches techniques PDF

Tyco Electronics - (SW-106 / SW-276) High Power GaAs SPDT Switch

Numéro de référence SW-106
Description (SW-106 / SW-276) High Power GaAs SPDT Switch
Fabricant Tyco Electronics 
Logo Tyco Electronics 





1 Page

No Preview Available !





SW-106 fiche technique
High Power GaAs SPDT Switch
DC - 3 GHz
SW-106, SW-276
Features
q +39 dBm Typ. 1 dB Compression Point,
-8V Control
q +65 dBm Typ. 3rd Order Intercept, -8V Control
q Insertion Loss of 0.4 dB Typical
q Low Power Consumption
q Fast Switching Speed
SW-106 (CR-5)
Guaranteed Specifications1
Frequency Range
DC - 3.0 GHz
Insertion Loss
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
Isolation
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
VSWR
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
(–55°C to +85°C)
SW-106 SW-276
0.5 dB
0.6 dB
0.8 dB
1.2 dB
0.4 dB Max
0.5 dB Max
0.7 dB Max
1.0 dB Max
34 dB
32 dB
20 dB
15 dB
37 dB Min
31 dB Min
24 dB Min
19 dB Min
1.3:1
1.5:1
1.5:1
1.6:1
1.3:1 Max
1.5:1 Max
1.5:1 Max
1.6:1 Mawxww.DataSheet4U.com
Operating Characteristics2
Impedance
50 Ohms Nominal
Switching Characteristics
Trise, Tfall (10% to 90% )
Ton, Toff (50% CTL to 90%/10% RF)
Transients (In-Band)
30 ns Typ
35 ns Typ
12 mV Typ
Input Power for Compression
0.9 GHz
(-5VControl)
0.9 GHz
(-8V Control)
0.1 dB
1.0 dB
+32.5 dBm +35.5 dBm
+35.5 dBm +39.5 dBm
Typ
Typ
Third Order Intercept Point (with two +10 dBm Input Tones)
0.9 GHz
(-5V Control)
+61 dBm Typ
0.9 GHz
(-8V Control)
+65 dBm Typ
Control Voltages
Vin Low
Vin High
0 to -0.2V @ 20 µA Max
-5V @ 50 µA Typ to -10V @ 800 µA Max
1. All specifications apply when operated with bias voltages of 0V for Vin Low
and -5 to -10V for Vin High, and 50 ohm impedance at all RFports, unless
otherwise specified.
2. High power (greater than 1W) handling specifications apply to cold switching
only. For input powers under 1W hot switching can be used.
3. Contact the factory for standard or custom screening requirements.
Ordering Information
Part Number
SW-106 PIN
SW-276 PIN
Package
Surface Mount
Ceramic
SW-276 (CR-2)
For both switches:
Unless Otherwise Noted:
Bottom of Case is AC Ground
Dimension in ( ) are in mm.
.xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ± 0.5)
V 2.00

PagesPages 3
Télécharger [ SW-106 ]


Fiche technique recommandé

No Description détaillée Fabricant
SW-106 (SW-106 / SW-276) High Power GaAs SPDT Switch Tyco Electronics
Tyco Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche