DataSheetWiki


XP1000-BD fiches techniques PDF

Mimix Broadband - GaAs MMIC Power Amplifier

Numéro de référence XP1000-BD
Description GaAs MMIC Power Amplifier
Fabricant Mimix Broadband 
Logo Mimix Broadband 





1 Page

No Preview Available !





XP1000-BD fiche technique
17.0-24.0 GHz GaAs MMIC
Power Amplifier
May 2007 - Rev 02-May-07
Features
High Linearity Output Amplifier
Balanced Design Provides Good Input/Output Match
On-Chip Temperature Compensated
Output Power Detector
19.0 dB Small Signal Gain
+36.0 dBm Third Order Intercept (OIP3)
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
P1000-BD
Chip Device Layout
P1000
General Description
Mimix Broadband’s two stage 17.0-24.0 GHz GaAs MMIC
power amplifier is optimized for linear operation with a
third order intercept point of +36.0 dBm.The device also
includes Lange couplers to achieve good input/output
return loss and an on-chip temperature compensated output
power detector.This MMIC uses Mimix Broadband’s 0.15 µm
GaAs PHEMT device model technology, and is based upon
electron beam lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect and
www.DataSheet4U.comprovide a rugged part with backside via holes and gold
metallization to allow either a conductive epoxy or eutectic
solder die attach process.This device is well suited for
Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+6.0 VDC
Supply Current (Id)
700 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (Pin)
+9.0 dBm
Storage Temperature (Tstg) -65 to +165 OC
Operating Temperature (Ta) -55 to MTTF Table4
Channel Temperature (Tch) MTTF Table4
(4) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness ( S21)
Reverse Isolation (S12)
Output Power for 1 dB Compression (P1dB)2
Output Third Order Intercept Point (OIP3)1,2
Drain Bias Voltage (Vd1,2,3,4) (Vd5 [Det], Rd=3-6K
Gate Bias Voltage (Vg1,2,3,4)
Supply Current (Id) (Vd=5.5V, Vg=-0.5V Typical)
Detector (diff ) Output at 20 dBm3
)
Units
GHz
dB
dB
dB
dB
dB
dBm
dBm
VDC
VDC
mA
VDC
Min.
17.0
-
-
-
-
-
-
+35.0
-
-1.0
-
-
Typ.
-
20.0
20.0
19.0
+/-1.0
40.0
+25.0
+36.0
+5.5
-0.5
430
0.28
Max.
24.0
-
-
-
-
-
-
-
+5.6
0.0
650
-
(1) Measured at +16 dBm per tone output carrier level at 22 GHz.
(2) Measured using constant current.
(3) Measured with either Vd5=I.0V or Vd5=5.5V and Rd=5.6K .
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. 2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purcha©sing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

PagesPages 6
Télécharger [ XP1000-BD ]


Fiche technique recommandé

No Description détaillée Fabricant
XP1000-BD GaAs MMIC Power Amplifier Mimix Broadband
Mimix Broadband

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche