DataSheetWiki


XP1003 fiches techniques PDF

Mimix Broadband - GaAs MMIC Power Amplifier

Numéro de référence XP1003
Description GaAs MMIC Power Amplifier
Fabricant Mimix Broadband 
Logo Mimix Broadband 





1 Page

No Preview Available !





XP1003 fiche technique
27.0-35.0 GHz GaAs MMIC
Power Amplifier
May 2005 - Rev 05-May-05
P1003
Features
Balanced Design Provides Good Input/Output Match
On-Chip Temperature Compensated Output
Power Detector
15.0 dB Small Signal Gain
+34.0 dBm Third Order Intercept (OIP3)
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
General Description
Mimix Broadbands two stage 27.0-35.0 GHz GaAs
MMIC power amplifier is optimized for linear operation
with a third order intercept point of +34.0 dBm.The
device also includes Lange couplers to achieve good
input/output return loss and an on-chip temperature
compensated output power detector.This MMIC uses
Mimix Broadbands 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam
lithography to ensure high repeatability and
uniformity.www.DataSheet4U.com The chip has surface passivation to protect
and provide a rugged part with backside via holes and
gold metallization to allow either a conductive epoxy
or eutectic solder die attach process.This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Gate Bias Voltage
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+6.0 VDC
950 mA
+0.3 VDC
+15 dBm
-65 to +165 OC
-55 to MTTF Table 4
MTTF Table 4
(4) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Units
Frequency Range (f )
GHz
Input Return Loss (S11)
dB
Output Return Loss (S22)
dB
Small Signal Gain (S21)
dB
Gain Flatness (S21)
dB
Reverse Isolation (S12)
Output Power for 1 dB Compression (P1dB) 2
Output Third Order Intercept Point (OIP3)1,2
dB
dBm
dBm
Drain Bias Voltage (Vd1,2,3,4)
VDC
Gate Bias Voltage (Vg1,2,3,4)
VDC
Supply Current (Id) (Vd=4.5V, Vg=-0.7V Typical)
Detector (diff ) Output at 20 dBm3
mA
VDC
(1) Measured at +17 dBm per tone output carrier level across the full frequency band.
(2) Measured using constant current.
(3) Measured with either Vin=1.0V or Vin=5.5V and Rin=5.6kΩ.
Min.
27.0
-
-
-
-
-
-
-
-
-1.0
-
-
Typ.
-
12.0
18.0
15.0
+/-1.0
35.0
+24.0
+34.0
+4.5
-0.7
440
0.3
Max.
35.0
-
-
-
-
-
-
-
+5.5
0.0
880
-
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Export
of
this
item
Characteristic Data and
may require appropriate
Specifications are subject
export licensing from the
tUo.Sc.hGaonvgeernwmitehnotu. Itnnpoutircceh.a©si2n0g05thMesime pixaBrtrso, aUd.Sb.aDnodm, Inesct.ic
customers
accept
their obligation to be compliant with U.S. Export Laws.

PagesPages 6
Télécharger [ XP1003 ]


Fiche technique recommandé

No Description détaillée Fabricant
XP1000 GaAs MMIC Power Amplifier Mimix Broadband
Mimix Broadband
XP1000-BD GaAs MMIC Power Amplifier Mimix Broadband
Mimix Broadband
XP1001 GaAs MMIC Power Amplifier Mimix Broadband
Mimix Broadband
XP1003 GaAs MMIC Power Amplifier Mimix Broadband
Mimix Broadband

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche