DataSheetWiki


AT34C02C fiches techniques PDF

ATMEL Corporation - Two-wire Serial EEPROM

Numéro de référence AT34C02C
Description Two-wire Serial EEPROM
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





AT34C02C fiche technique
Features
Permanent and Reversible Software Write Protection for the First-half of the Array
– Software Procedure to Verify Write Protect Status
Hardware Write Protection for the Entire Array
Low-voltage and Standard-voltage Operation
– 1.7 (VCC = 1.7V to 3.6V)
Internally Organized 256 x 8
Two-wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise Suppression
Bidirectional Data Transfer Protocol
100 kHz (1.7V) and 400 kHz (2.7V and 3.6V) Compatibility
16-byte Page Write Modes
Partial Page Writes Are Allowed
Self-timed Write Cycle (5 ms max)
High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 8-lead TSSOP, and 8-ball
dBGA2 Packages
Description
The AT34C02C provides 2048 bits of serial electrically-erasable and programmable
read only memory (EEPROM) organized as 256 words of 8 bits each. The first-half of
the device incorporates a permanent and a reversible software write protection feature
while hardware write protection for the entire array is available via an external pin.
Once the permanent software write protection is enabled, by sending a special com-
mand to the device, it cannot be reversed. However, the reversible software write
www.DataSheet4pUr.coomtection is enabled and can be reversed by sending a special command. The hard-
ware write protection is controlled with the WP pin and can be used to protect the
entire array, whether or not the software write protection has been enabled. This
allows the user to protect none, first-half, or all of the array depending on the applica-
tion. The device is optimized for use in many industrial and commercial applications
where low-power and low-voltage operations are essential. The AT34C02C is avail-
able in space saving 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 8-lead
TSSOP, and 8-ball dBGA2 packages and is accessed via a Two-wire serial interface.
It is available in 1.7V (1.7V to 3.6V).
Table 1. Pin Configurations
Pin Name Function
A0 - A2
Address Inputs
SDA
Serial Data
SCL Serial Clock Input
WP Write Protect
8-lead TSSOP
8-ball dBGA2
8-lead Ultra Thin Mini-MAP
VCC
WP
SCL
SDA
8
7
6
5
1 A0
2 A1
3 A2
4 GND
VCC
WP
SCL
SDA
8
7
6
5
1 A0
2 A1
3 A2
4 GND
Bottom View
(MLP 2x3)
Bottom View
8-lead SOIC
A0
A1
A2
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
A0
A1
A2
GND
1
2
3
4
8 VCC
7 WP
6 SCL
5 SDA
Two-wire Serial
EEPROM
with Permanent
and Reversible
Software Write
Protect
2K (256 x 8)
AT34C02C
Preliminary
Rev. 5185A–SEEPR–9/06
1

PagesPages 20
Télécharger [ AT34C02C ]


Fiche technique recommandé

No Description détaillée Fabricant
AT34C02 2-Wire Serial EEPROM with Permanent Software Write Protect ATMEL Corporation
ATMEL Corporation
AT34C02-10PC 2-Wire Serial EEPROM with Permanent Software Write Protect ATMEL Corporation
ATMEL Corporation
AT34C02-10PC-1.8 2-Wire Serial EEPROM with Permanent Software Write Protect ATMEL Corporation
ATMEL Corporation
AT34C02-10PC-2.7 2-Wire Serial EEPROM with Permanent Software Write Protect ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche