(PDF) NC26 Datasheet - 1.5 X 5mm / 2 X 6mm / 3 X 8mm Thru-hole

Número de pieza	NC26
Descripción	1.5 X 5mm / 2 X 6mm / 3 X 8mm Thru-hole
Fabricantes	Fox Electronics
Logotipo
Hay una vista previa y un enlace de descarga de NC26 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas
No Preview Available ! THRU-HOLE TUNING FORK NC15/NC26/NC38 FEATURES • Miniature Packages • Low Cost • Cold Weld Design • Long Term Stability • Tight Tolerance • STANDARD SPECIFICATIONS PARAMETERS MAX (unless otherwise noted) Frequency 32.768 kHz Frequency Tolerance @ 25ºC ± 20 PPM Frequency Stability Temperature Coefficient Temperature Range -0.04 PPM / (∆ºC)2 Turnover (TO) +20ºC ~ +30ºC Operating (TOPR) -20ºC ~ +60ºC Storage (TSTG) -30ºC ~ +70ºC Equivalent Series Resistance (RS) NC15 / NC26 NC38www.DataSheet4U.com Load Capacitance (CL) 50 kΩ 35 kΩ 12.5 pF (Standard) Insulation Resistance @ 100VDC Drive Level 6 pF (Optional) 500 MΩ 1.0 µW Aging per year ±3 PPM All specifications subject to change without notice. Rev. 02/10/03 All dimensions are in millimeters. 26 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +001(239)693-0099 FAX +001(239)693-1554 http://www.foxonline.com © 2003 FOX ELECTRONICS 1 page

Páginas	Total 1 Páginas
PDF Descargar	[ Datasheet NC26.PDF ]

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

PDF NC26 Data sheet ( Hoja de datos )