|
|
Número de pieza | DI-8B32 | |
Descripción | Analog Current Input Modules | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DI-8B32 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! DI-8B32 Analog Current Input Modules
FEATURES
• Accepts Milliamp Level Signals
• High Level Voltage Outputs
• 1500Vrms Transformer Isolation
• ANSI/IEEE C37.90.1 Transient Pro-
tection
• Input Protected to 30VAC Continu-
ous
• 120dB CMR
• 70dB NMR at 60Hz
• ±0.05% Accuracy
• ±0.02% Linearity
• Low Drift with Ambient Temperature
• CSA, FM and CE Certifications
Pending
• Mix and Match Module Types
DESCRIPTION
DI-8B modules are an optimal solution
for monitoring real-world process signals
and providing high level signals to a data
acquisition system. Each DI-8B32 module
isolates, filters and amplifies a process
current input signal and provides an analog
voltagewww.DataSheet4U.com output.
Current to voltage conversion is accom-
plished internal to the module to ensure
high accuracy.
Signal filtering is accomplished with a
three-pole filter optimized for time and
frequency response which provides 70dB
of normal-mode-rejection at 60Hz.
One pole of this filter is on the field side of
the isolation barrier for anti-aliasing, and
the other two are on the system side.
A special input circuit on the 8B32 module
provides protection against accidental
connection of power-line voltages up to
30VAC.
Isolation is provided by optical coupling
to suppress transmission of common mode
spikes or surges. The module is powered
from +5VDC, ±5%.
The modules are designed for installation
in Class I, Division 2 hazardous locations
and have a high level of immunity to envi-
ronmental noise.
SPECIFICATIONS
Typical at TA = +25ºC and +5V Power
DI-8B32
Input Range
0mA to 20mA or 4mA to 20mA
Input Resistance
Normal
Power Off
<50Ω
<50Ω
Input Protection
Continuous
Transient
40VAC
ANSI/IEEE C37.90.1
CMV, Input to Output
1500Vrms max
Transient, Input to Output
ANSI/IEEE C37.90.1
CMR (50Hz or 60Hz)
120dB
NMR
70dB at 60Hz
Accuracy*
±0.05% span
Nonlinearity
±0.02% Span
Stability
Output
Gain
±25ppm/ºC
±50ppm/ºC
Noise
Output, 100kHz
250µVrms
Bandwidth, -3dB
3Hz
Response Time, 90% Span
150ms
Output Range
0 to +5V
Output Protection
Transient
Continuous Short to Ground
ANSI/IEEE C37.90.1
Power Supply Voltage
+5VDC ±5%
Power Supply Current
30mA
Power Supply Sensitivity
±25ppm/%
Mechanical Dimensions
1.11" × 1.65" × 0.40"
(28.1mm × 41.9mm × 10.2mm)
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
-40ºC to +85ºC
-40ºC to +85ºC
0 to 95% Noncondensing
*Includes nonlinearity, hysteresis and repeatability.
DATAQ Instruments, Inc. • 241 Springside Drive • Akron, Ohio 44333 • Tel: 330-668-1444 • Email: [email protected] • www.dataq.com
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet DI-8B32.PDF ] |
Número de pieza | Descripción | Fabricantes |
DI-8B32 | Analog Current Input Modules | ETC |
DI-8B35 | Linearized 4-Wire RTD Input Modules | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |