DataSheet.es    


PDF WT6621 Data sheet ( Hoja de datos )

Número de pieza WT6621
Descripción Dual USB Power Control Switch
Fabricantes Weitron Technology 
Logotipo Weitron Technology Logotipo



Hay una vista previa y un enlace de descarga de WT6621 (archivo pdf) en la parte inferior de esta página.


Total 15 Páginas

No Preview Available ! WT6621 Hoja de datos, Descripción, Manual

WT6621
Dual USB Power Control Switch
GENERAL DESCRIPTION
The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered
Universal Serial Bus (USB) applications. Few external components are necessary to satisfy
USB requirements. With independent enable and error flag functions, the WT6621 can ease
control the supplied power conditions of USB down stream; each switch channel can supplies
up to 500mA to downstream devices; the switch low on-resistance meets USB voltage drop
requirements; fault current is limited to typically 750mA, and a flag output is available to
indicate fault conditions to the local USB controller. Additional features include thermal
shutdown to prevent switch failure from high-current loads, undervoltage lockout (UVLO) to
ensure there is a valid input voltage present, and 3.3V and 5V logic compatible enable inputs.
www.DataSheet4U.com
FEATURES
! Compliant to USB specifications
! Max. Continuous load current: 500mA
! 140mmaximum on-resistance per channel.
! 110uA typical on-state supply current
! 1uA typical off-state supply current
! Enable input is compatible with both 3V and 5V Logic
! Logic Over current output
! Undervoltage lockout
! Short Circuit Protection
! Thermal Shutdown
! Active-high or active-low enable versions
! 12KV output, 6KV input ESD protection.
! Packages: 8pin SOIC and 8pin DIP
Applications
! USB host and Self-power hubs
! USB bus-powered hub
! General purpose power switch applications
Version1.0
Weltrend Semiconductor, Inc. All Rights Reserved

27 March, 2000

1 page




WT6621 pdf
WT6621
Dual USB Power Control Switch
Fault Flag
The fault flag (/FG) is active low for one or more of the following fault conditions: undervoltage,
overload or short circuit, or thermal shutdown. /FG pin is capable of sinking a 10mA load.
Version1.0
Weltrend Semiconductor, Inc. All Rights Reserved

27 March, 2000

5 Page





WT6621 arduino
Short-circuit response
(Enable into Short Circuit)
VEN
VFLAG
VOUT
IOUT
WT6621
Dual USB Power Control Switch
1.6A
Thermal Shoutdown
Version1.0
Weltrend Semiconductor, Inc. All Rights Reserved

27 March, 2000

11 Page







PáginasTotal 15 Páginas
PDF Descargar[ Datasheet WT6621.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
WT6621Dual USB Power Control SwitchWeitron Technology
Weitron Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar