DataSheetWiki


ATS278 fiches techniques PDF

Anachip - Two Phase Hall Effect Latch

Numéro de référence ATS278
Description Two Phase Hall Effect Latch
Fabricant Anachip 
Logo Anachip 





1 Page

No Preview Available !





ATS278 fiche technique
www.DataSheet4U.com
Two Phase Hall Effect Latch With FG Output
ATS278
„ Features
„ General Description
- On-chip Hall plate
- Operating voltage: 3.5V~20V
- Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range
- High output sinking capability up to 400mA for
driving large load
- Built-in protection diode only for chip reverse
power connecting
- Frequency Generation (FG) output
- Package: SIP-5L
„ Applications
- Dual-coil Brush-less DC Motor
- Dual-coil Brush-less DC Fan
- Revolution Counting
- Speed Measurement
ATS278 is an integrated Hall sensor with two output
drivers and rotor speed output, typically designed
for electronic commutation of two-phase brush-less
DC fan applications.
On-chip Hall sensor will generate Hall voltage due
to magnetics sensing. The amplifier will amplify the
Hall voltage. The Schmitt trigger determines
switching hysteresis and then control internal
driver’s on/off to sink load current. Meanwhile, An
internal bandgap regulator is used to provide stable
bais due to temperature-compensation. FG pin will
provide switching frequency of driver. Major feature
is to minimize the external components by
building-in FG output transistor.
If a magnetic flux density larger than threshold Bop,
DO is turned on (low) and DOB is turned off (high).
The output state is held until a magnetic flux density
reversal falls below Brp causing DO to be turned off
and DOB turned on.
„ Ordering Information
ATS278 X - X X - X
Wafer Body
Blank or
A~Z : if necessary
to specify
*Packing: Bulk
Package
P: SIP-5L
Lead
L : Lead Free
Magnetic
Characteristics
A or B
„ Typical Application Circuit
5V/12V
+
C1
Rpu
278
1 2345
Coil1
Coil2
Speed
R1 = R2 = 47
C1 = C2 = 2.2 μF
The R, C value need to be fine tuned
base on coils design.
R1 R2
C1 C2
5V/12V DC Brush-less Fan with FG output function
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. 1.0 Oct 4, 2005
1/6

PagesPages 6
Télécharger [ ATS278 ]


Fiche technique recommandé

No Description détaillée Fabricant
ATS276 Complementary Output Hall Effect Latch ETC
ETC
ATS277 Complementary Output Hall Effect Latch ETC
ETC
ATS278 Two Phase Hall Effect Latch Anachip
Anachip

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche