|
|
PDF ATS477 Data sheet ( Hoja de datos )
| Número de pieza | ATS477 | |
| Descripción | Single Phase Hal Efect Latch | |
| Fabricantes | Anachip | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ATS477 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Single Phase Hall Effect Latch
ATC
ATS477
Features
General Description
- On-chip Hall sensor
- Bi-direction H type output drivers for single coil
- Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range
- High output sinking capability up to 250mA
- Operating voltage: 3.5V~20V
- Low output switching current noise
- Build-in shunt Zener protection for output driver
- SOP-7L provide FG output pin
- Package: SIP-4L and SOP-7L
Applications
- Single-coil Brush-less DC Fan
- Single-coil Brush-less DC Motor
Ordering Information
ATS477 that integrates Hall sensor with output
drivers is designed for electrical commutation of
brush-less DC motor application. The device
includes on-chip Hall voltage generator for
magnetic sensing, the error amplifier that amplifies
the Hall voltage, a comparator that is to provide
switching hysteresis for noise rejection, the
bi-direction drivers for sinking and driving large
current load, and the frequency generator (FG) that
provides a signal proportional to rotation speed.
Internal bandgap regulator is used to provide
temperature compensated bias for internal circuits
and allows a wide operating supply voltage range.
Built-in protection circuit and output shunt Zener
diodes were applied for protecting output drivers
during operating.
If a magnetic flux density is larger than threshold
Bop, DO is turned to sink and DOB is turned to
drive. The output state is held until a magnetic flux
density reversal falls below Brp causing DO to be
turned to drive and DOB turned to sink.
ATS477 is rated for operation over-temperature
range from -20 oC to 85 oC and voltage range from
3.5V to 20V. The devices are available in low cost
die forms or rugged SIP-4L and power SOP-7L
packages.
ATS477 X - X X X - X
Wafer Body
Package
Lead
Packing
Blank or
A~Z : if necessary
to specify
P: SIP-4L
S: SOP-7L
L : Lead Free
Blank: Normal
Blank : Tube or Bulk
A : Tape & Reel
Application Circuit
Magnetic
Characteristics
A or B
12
34
FG
coil
Vcc
(SIP-4L)
Vcc
Single-coil brush-less DC Fan
17
26
3
45
(SOP 7)
coil
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. A5 Apr 15, 2004
1/7
1 page  
Single Phase Hall Effect Latch
DOB
HYSTERCSIS CHARACTERISTICS
DO
ATC
ATS477
RP 12 OFF
10
8
6
4
ON 2 OP
Vsat
-200 -100 0
100 200
Magnetic Flux Density in Gauss
Operation Characteristics
OFF
RP
12 OP
10
8
6
4
2 ON
Vsat
-200 -100 0
100 200
Magnetic Flux Density in Gauss
DO
S
Marking side
S
Marking side
N
( SOP-7 )
N
( SIP4 )
Marking Information
High
Vcc
Vd
Bhy
Low
Vsat
Brp 0 Bop
( Magnetic flux density )
Part Number
( Top View )
477
X XX X X
Blank : normal
L : Lead Free Package
ID Code: A ~ Z
Nth week: 01~52
Year: "1" = 2001
"2" = 2002
Anachip Corp.
www.anachip.com.tw
Rev. A5 Apr 15, 2004
5/7
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet ATS477.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ATS477 | Single Phase Hal Efect Latch | Anachip |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |