DataSheetWiki


ON2253 fiches techniques PDF

Panasonic Semiconductor - Reflective photosensor

Numéro de référence ON2253
Description Reflective photosensor
Fabricant Panasonic Semiconductor 
Logo Panasonic Semiconductor 





1 Page

No Preview Available !





ON2253 fiche technique
wwwR.DeaflteacSthiveeet4PUh.cootomsensors (Photo Reflectors)
CNZ2253 (ON2253)
Reflective Photosensor
Overview
CNZ2253 is a photosensor detecting the change of reflective light
in which a high efficiency GaAs infrared light emitting diode is used
as the light emitting element, and a high sensitivity Si Darlington
phototransistor is used as the light detecting element. The two
elements are located parallel in the same direction and objects are
detected when passing in front of the device.
Features
High sensitivity
Small size and light weight
Applications
Detection of paper, film and cloth Optical mark reading
Detection of position and edge
Detection of coin and bill
Mark for indicating
LED side
7.5±0.2
(3.2)
Unit : mm
10.6±0.3
9.6±0.3
ø2.2±0.2
ø0.45±0.05
(7.2)
ø0.3±0.05
2 3 *2-0.9±0.15
Start, end mark detection of magnetic tape
Absolute Maximum Ratings (Ta = 25˚C)
Parameter
Symbol Ratings
Reverse voltage (DC)
Input (Light
Forward current (DC)
emitting diode)
Power dissipation
VR
IF
PD*1
3
50
75
Collector to emitter voltage
Output (Photo Emitter to collector voltage
transistor) Collector current
Collector power dissipation
VCEO
VECO
IC
PC*2
20
5
30
100
Temperature
Operating ambient temperature Topr –25 to +85
Storage temperature
Tstg –30 to +100
Unit
V
mA
mW
V
V
mA
mW
˚C
˚C
Electrical Characteristics (Ta = 25˚C)
14
(Note)
1 23
4
1. ( ) Dimension is reference
Pin connection
2. * is dimension at the root of leads
*1 Input power derating ratio is
1.0 mW/˚C at Ta 25˚C.
*2 Output power derating ratio is
1.34 mW/˚C at Ta 25˚C.
Parameter
Symbol
Conditions
min typ max Unit
Forward voltage (DC)
Input
characteristics Reverse current (DC)
Capacitance between terminals
VF IF = 50mA
IR VR = 3V
Ct VR = 0V, f = 1MHz
1.2 1.5 V
10 µA
50 pF
Output characteristics Collector cutoff current
ICEO VCE = 10V
0.5 µA
Transfer Collector current
characteristics Response time
IC*1*2 VCC = 5V, IF = 10mA, RL = 100
tr*3 , tf*4 VCC = 10V, IC = 1mA, RL = 100
3 30 mA
150 µs
Collector to emitter saturation voltage VCE(sat) IF = 50mA, IC = 1mA
1.5 V
*1 IC classifications
*2 Transfer characteristics measurement circuit
Class Q R S (Ambient light is shut off completely)
IC (mA)
3 to 9
6 to 18
12 to 30
*3 Time required for the collector current to increase
from 10% to 90% of its final value.
*4 Time required for the collector current to decrease
from 90% to 10% of its initial value.
tr
90%
10%
tf
IF
VCC
IC
d = 3 mm
RL Standard white paper
(Reflective ratio 90%)
Note) The part number in the parenthesis shows conventional part number.
1

PagesPages 3
Télécharger [ ON2253 ]


Fiche technique recommandé

No Description détaillée Fabricant
ON2253 Reflective photosensor Panasonic Semiconductor
Panasonic Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche