DataSheetWiki


AT25DF321 fiches techniques PDF

ATMEL Corporation - (AT25DF321 / AT26DF321) 32M-Bit Serial Firmware Dataflash Memory

Numéro de référence AT25DF321
Description (AT25DF321 / AT26DF321) 32M-Bit Serial Firmware Dataflash Memory
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





AT25DF321 fiche technique
www.DataSheet4U.com
Features
Single 2.7V - 3.6V Supply
Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3
66 MHz Maximum Clock Frequency
Flexible, Uniform Erase Architecture
– 4-Kbyte Blocks
– 32-Kbyte Blocks
– 64-Kbyte Blocks
– Full Chip Erase
Individual Sector Protection with Global Protect/Unprotect Feature
– Sixty-Four 64-Kbyte Physical Sectors
Hardware Controlled Locking of Protected Sectors
Flexible Programming
– Byte/Page Program (1 to 256 Bytes)
Automatic Checking and Reporting of Erase/Program Failures
JEDEC Standard Manufacturer and Device ID Read Methodology
Low Power Dissipation
– 7 mA Active Read Current (Typical)
– 4 µA Deep Power-Down Current (Typical)
Endurance: 100,000 Program/Erase Cycles
Data Retention: 20 Years
Complies with Full Industrial Temperature Range
Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
– 8-lead SOIC (200-mil wide)
– 16-lead SOIC (300-mil wide)
1. Description
The AT26DF321 is a serial interface Flash memory device designed for use in a wide
variety of high-volume consumer based applications in which program code is shad-
owed from Flash memory into embedded or external RAM for execution. The flexible
erase architecture of the AT26DF321, with its erase granularity as small as 4-Kbytes,
makes it ideal for data storage as well, eliminating the need for additional data storage
EEPROM devices.
The physical sectoring and the erase block sizes of the AT26DF321 have been opti-
mized to meet the needs of today's code and data storage applications. By optimizing
the size of the physical sectors and erase blocks, the memory space can be used
much more efficiently. Because certain code modules and data storage segments
must reside by themselves in their own protected sectors, the wasted and unused
memory space that occurs with large sectored and large block erase Flash memory
devices can be greatly reduced. This increased memory space efficiency allows addi-
tional code routines and data storage segments to be added while still maintaining the
same overall device density.
32-megabit
2.7-volt Only
Serial Firmware
DataFlash®
Memory
AT26DF321
For New
Designs Use
AT25DF321
See applicable errata in
Section 17.
3633E–DFLASH–10/07

PagesPages 30
Télécharger [ AT25DF321 ]


Fiche technique recommandé

No Description détaillée Fabricant
AT25DF321 32M-Bit Serial Firmware Dataflash Memory ATMEL Corporation
ATMEL Corporation
AT25DF321 (AT25DF321 / AT26DF321) 32M-Bit Serial Firmware Dataflash Memory ATMEL Corporation
ATMEL Corporation
AT25DF321A 32-Mbit 2.7V Minimum Serial Peripheral Interface Serial Flash Memory Adesto
Adesto
AT25DF321A 32-Megabit 2.7-volt MinimumSPI Serial Flash Memory ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche