|
|
Número de pieza | ATP0644-3 | |
Descripción | SPECIFICATIONS FOR STANDARD RESISITIVE TOUCH PANEL | |
Fabricantes | AZ Displays | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ATP0644-3 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! AZ DISPLAYS, INC.
www.DataSheet4U.com
SPECIFICATIONS FOR STANDARD
RESISITIVE TOUCH PANEL
PART NUMBER:
DATE:
ATP0644-3
September 14, 2004
Page 1 of 7
1 page AZ DISPLAYS, INC.
ATP0644-3
• • 5.0 REJECT CRITERIA
Description
Reject Criteria
Film Dent
Area ≥ 0.1mm2
Area ≥ 0.05mm2 & area < 0.1mm2
Area < 0.05mm2
: to be zero
: to be max. 5 points
: none specified
www.DataSheet4U.coFmoreign
material
between
glass and film
Dot type
Line type
Area > 0.1mm2
Area ≥ 0.05mm2 & area < 0.1mm2
Area < 0.05mm2
Area ≥ 0.1mm
Area ≥ 0.03mm & width <0.1mm and length < 10mm
Area < 0.05mm
: to be zero
: to be max. 5 points
: none specified
: to be zero
: to be max. 1 point
: none specified
Scratch
Area ≥ 0.1mm
: to be zero
Area ≥ 0.03mm & width <0.1mm with length < 80mm : to be max. 1 point
Area < 0.03mm & width <0.1mm with length < 30mm : none specified
Dot blur or hard coat
missing
Area ≥ 0.5mm2
Area ≥ 0.03mm2 & area < 0.5mm2
Area < 0.05mm2
: to be zero
: to be max. 5 points
: none specified
Newton Ring
These must not be seen from Panel film side under a fluorescent lamp (3
wavelength type lamp). Not to be verified form glass side.
Glass flaw
To be no flaw which is bigger than that shown in the following diagram. The
number of flaws is not specified.
3mm
2mm
5mm
2mm
• • 6.0 GENERAL POINTS OF CAUTION
Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the
cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a
cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solu-
tion. Watch the edge of the panel when cleaning, again for safety reasons.
Page 5 of 7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet ATP0644-3.PDF ] |
Número de pieza | Descripción | Fabricantes |
ATP0644-3 | SPECIFICATIONS FOR STANDARD RESISITIVE TOUCH PANEL | AZ Displays |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |