|
|
Número de pieza | ATA2526 | |
Descripción | Low-voltage IR Receiver ASSP | |
Fabricantes | ATMEL Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ATA2526 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! ATA2526
Low-voltage IR Receiver ASSP
DATASHEET
Features
● No external components except PIN diode
● Supply-voltage range: 2.7V to 5.5V
● High sensitivity due to automatic sensitivity adaption (AGC) and automatic strong
signal adaption (ATC)
● Automatic supply voltage adaptation
● High immunity against disturbances from daylight and lamps
● Small size and innovative pad layout
● Available for carrier frequencies between 33kHz to 40kHz and 56kHz; adjusted by
zener diode fusing ±2.5%
● TTL and CMOS compatible
Applications
● Home entertainment applications
● Home appliances
● Remote control equipment
4905G-AUTO-04/14
1 page 4. Electrical Characteristics, 5-V Operation (Continued)
Tamb = –25°C to +85°C, VS = 4.5V to 5.5V unless otherwise specified.
No. Parameters
Test Conditions
Symbol Min. Typ. Max. Unit Type*
7 Input
7.1 Input DC current
VIN = 0
see Figure 5-10 on page 9
IIN_DCMAX
–400
µA C
7.2
Input DC current
see Figure 5-4 on page 7
VIN = 0; VS = 5V
Tamb = 25°C
Minimum detection
Test signal:
7.3 threshold current
see Figure 5-9 on page 9
see Figure 5-2 on page 6 VS = 5V
Tamb = 25°C
Minimum detection
IIN_DC = 1µA
square pp
7.4
threshold current with AC burst N = 16
current disturbance
IIN_AC100 = 3µA at 100Hz
f = f0; tPER = 10ms
see Figure 5-8 on page 8
BER = 50(1)
IIN_DCMAX
IEemin
IEemin
–700
–1000
–2500
µA B
pA B
pA C
Maximum detection
7.5 threshold current with
VIN > 0V
Test signal:
see Figure 5-9 on page 9
VS = 5V, Tamb = 25°C
IIN_DC = 1µA
square pp
burst N = 16
f = f0; tPER = 10ms
see Figure 5-8 on page 8
BER = 5%(1)
IEemax
–500
µA D
8 Controlled Amplifier and Filter
8.1
Maximum value of variable
gain (CGA)
VS = 5V, Tamb = 25°C
GVARMAX
50
dB D
8.2
Minimum value of variable
gain (CGA)
VS = 5V, Tamb = 25°C
GVARMIN
–6
dB D
8.3 Total internal amplification(2) VS = 5V, Tamb = 25°C
GMAX
72 dB
8.4
Resulting center frequency f0 fused at VS = 3V
fusing accuracy
VS = 5V, Tamb = 25°C
f05V
f03V-FUSE
+ 0.5
%
*) Type means: A =100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter
D
C
Notes: 1. BER = bit error rate; e.g., BER = 5% means that with P = 20 at the input pin 19...21 pulses can appear at the pin OUT
2. After transformation of input current into voltage
4.1 Reliability
Electrical qualification (1000h at 150°C) in molded SO8 plastic package
ATA2526 [DATASHEET]
4905G–AUTO–04/14
5
5 Page 7. Ordering Information
Delivery: unsawn wafers (DDW) in box
Extended Type Number
ATA2526S1xx(1)C-DDW
ATA2526S3xx(1)C-DDW
ATA2526S7xx(1)C-DDW
D(2)
2175
1400
3415
Type
Standard type: ≥ 10 pulses, high data rate
Lamp type: ≥ 10 pulses, enhanced suppression of disturbances, secure data
transmission
Short burst type: ≥ 6 pulses, highest data rate
Notes: 1. xx means carrier frequency value (33, 36, 37, 38 or 40kHz and 56kHz)
2. Maximum data transmission rate up to bits/s with f0 = 56kHz, VS = 5V (see Figure 5-6 on page 7)
7.1 Pad Layout
Figure 7-1. Pad Layout
GND
IN
OUT
ATA2526
Pad Layout
VS Zapping
Versioning
Table 7-1. Pin Description
Symbol
OUT
VS
GND
IN
Zapping
Versioning
Function
Data output
Supply voltage
GND
Input pin diode
f0 adjust
Type adjust
ATA2526 [DATASHEET]
4905G–AUTO–04/14
11
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet ATA2526.PDF ] |
Número de pieza | Descripción | Fabricantes |
ATA2525 | IR Receiver ASSP | ATMEL Corporation |
ATA2526 | Low-voltage IR Receiver ASSP | ATMEL Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |