DataSheetWiki


LM1042 fiches techniques PDF

National Semiconductor - Fluid Level Detector

Numéro de référence LM1042
Description Fluid Level Detector
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





LM1042 fiche technique
February 1995
LM1042 Fluid Level Detector
General Description
The LM1042 uses the thermal-resistive probe technique to
measure the level of non-flammable fluids An output is pro-
vided proportional to fluid level and single shot or repeating
measurements may be made All supervisory requirements
to control the thermal-resistive probe including short and
open circuit probe detection are incorporated within the de-
vice A second linear input for alternative sensor signals
may also be selected
Features
Y Selectable thermal-resistance or linear probe inputs
Y Control circuitry for thermal-resistive probe
Y Single-shot or repeating measurements
Y Switch on reset and delay to avoid transients
Y Output amplifier with 10 mA source and sink capability
Y Short or open probe detection
Y a50V transient protection on supply and control input
Y 7 5V to 18V supply range
Y Internally regulated supply
Y b40 C to a80 C operation
Block Diagram
C1995 National Semiconductor Corporation TL H 8709
TL H 8709 – 1
RRD-B30M115 Printed in U S A

PagesPages 8
Télécharger [ LM1042 ]


Fiche technique recommandé

No Description détaillée Fabricant
LM104 Negative Regulator National Semiconductor
National Semiconductor
LM1040 DUAL DC OPERATED TONE / VOLUME / BALANCE CIRCUIT National Semiconductor
National Semiconductor
LM1042 Fluid Level Detector National Semiconductor
National Semiconductor
LM1042 LM1042 Fluid Level Detector (Rev. A) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche