DataSheetWiki


CF5015 fiches techniques PDF

Nippon Precision Circuits - 2.5V Operation Fundamental Frequency Crystal Oscillator Module ICs

Numéro de référence CF5015
Description 2.5V Operation Fundamental Frequency Crystal Oscillator Module ICs
Fabricant Nippon Precision Circuits 
Logo Nippon Precision Circuits 





1 Page

No Preview Available !





CF5015 fiche technique
www.datasheet4u.com
CF5015 series
2.5V Operation Fundamental Frequency
Crystal Oscillator Module ICs
OVERVIEW
The CF5015 series are 2.5V operation crystal oscillator ICs. They are available for frequencies up to 60MHz.
The product lineup consists of AL× series for 2.5V exclusive use and BL× series compliant with 2.5V to 5V.
The built-in oscillator capacitor of AL× series is large, so that AL× series contribute to improve the frequency
stability. For the BL× series, the current consumption and drive level reduced so that they can realize the char-
acteristics easier to design small-sized crystal oscillators. The oscillator circuit of each version is simply con-
structed, so that it can realize the crystal oscillator with excellent phase noise characteristics. Even if the valued
characteristics differ due to the application or the purpose, the selecting from these series for different purposes
allows the optimization.
FEATURES
I Operating supply voltage range
• CF5015AL×: 2.25 to 2.75V
• CF5015BL×: 2.25 to 5.5V
I Up to 60MHz oscillation frequency range
I – 40 to 85°C operating temperature range
I Oscillation capacitors built-in
• CF5015AL×: CG = 18pF, CD = 18pF
• CF5015BL×: CG = 4pF, CD = 8pF
I Inverter amplifier feedback resistor built-in
I Standby function
• High impedance in standby mode, oscillator stops
I Low standby current
• Power-saving pull-up resistor built-in
I fO, fO/2, fO/4, fO/8, or fO/16 output frequency,
determined by internal connection
I CMOS output duty level (1/2VDD)
I Molybdenum-gate CMOS process
I Chip form (CF5015×L×)
SERIES CONFIGURATION
Version
CF5015AL1
Operating
supply
voltage
range [V]
Recommended oscillation frequency range*1 [MHz]
2.5V operation
3V operation
5V
operation
CL = 15pF CL = 30pF CL = 15pF CL = 30pF CL = 30pF
Standby mode
Built-in
capacitance [pF]
Output
frequency
Oscillator
stop
CG CD
function
Output
state
fO*2
CF5015AL2
fO/2
CF5015AL3 2.25 to 2.75 4 to 60 4 to 50
18 18
fO/4
Yes
Hi-Z
CF5015AL4
fO/8
CF5015AL5
CF5015BL1
fO/16
fO*2
CF5015BL2
fO/2
CF5015BL3
2.25 to 3.6
4.5 to 5.5
12 to 60
12 to 50
12 to 60
12 to 50
12 to 60
4
8
fO/4
Yes
Hi-Z
CF5015BL4
fO/8
CF5015BL5
fO/16
*1. The recommended oscillation frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscil-
lator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the
oscillation characteristics of components must be carefully evaluated.
*2. Oscillation frequency
ORDERING INFORMATION
Device
CF5015×L×–2
Package
Chip form
SEIKO NPC CORPORATION —1

PagesPages 10
Télécharger [ CF5015 ]


Fiche technique recommandé

No Description détaillée Fabricant
CF5010 Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits
CF5011 1.8V Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits
CF5012 Low-current Consumption Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits
CF5014 Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche