DataSheetWiki


CF5019 fiches techniques PDF

Nippon Precision Circuits - 3rd Overtone Crystal Oscillator Module ICs

Numéro de référence CF5019
Description 3rd Overtone Crystal Oscillator Module ICs
Fabricant Nippon Precision Circuits 
Logo Nippon Precision Circuits 





1 Page

No Preview Available !





CF5019 fiche technique
www.datasheet4u.com
CF5019 series
High-Frequency, 3rd Overtone Crystal Oscillator Module ICs
OVERVIEW
The CF5019 series are high-frequency, 3rd overtone crystal oscillator module ICs. They incorporate an oscilla-
tor circuit and an output buffer that operate at high frequency on a single chip. The oscillator circuit employs
CMOS inverters and a built-in damping resistor RD, reducing the crystal current compared with existing
devices. The damping resistor RD is fabricated using NPC’s unique high-precision thin-film resistor technol-
ogy, which suppresses oscillator characteristic variations due to changes in temperature and voltage to a mini-
mum. The CF5019 series can be utilized to construct stable, high-frequency, 3rd overtone crystal oscillators.
FEATURES
I RD built-in to reduce crystal current in the oscilla-
tor circuit
I 2.25 to 3.6V operating supply voltage range
I Recommended operating frequency range
(varies with version)
• 2.5V operation: 60 to 155MHz
• 3.0V operation: 60 to 170MHz
I – 40 to 85°C operating temperature range
I Oscillator capacitors with excellent frequency
response built-in
I Feedback resistors with good temperature charac-
teristics built-in
I Standby function
• High impedance in standby mode, oscillator stops
I Low standby current
• Power-saving pull-up resistor built-in
I Oscillation detector function
I CMOS output duty level (1/2VDD)
I 50 ± 5% output duty (at 1/2VDD)
I 30pF output load (3.3V operation)
I Molybdenum-gate CMOS process
I Chip form (CF5019AL×)
APPLICATIONS
I Crystal oscillator modules (3rd overtone oscillation)
SERIES CONFIGURATION
Version
CF5019ALA
CF5019ALB
CF5019ALC
CF5019ALD
CF5019ALE
Recommended operating
frequency range*1 [MHz]
2.5V operation 3.0V operation
gm ratio
Oscillator circuit constants
Built-in capacitance Feedback Damping
resistance resistance
CG [pF] CD [pF] Rf [k] RD []
60 to 80 60 to 90 0.6 4
7 2.5 200
70 to 115
80 to 125
0.8
3
3 4.5 57
105 to 135 115 to 145
1.0
1
3 3.3 57
110 to 155 135 to 170
1.0
1
5 2.2 57
90 to 125
95 to 135
0.8
2
7 3.3 57
INHN
input
level
CMOS
Standby mode
Oscillator
stop
function
Output
state
Yes
High
impedance
*1.The recommended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication.
However, the oscillator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics
and mounting conditions, so the oscillation characteristics of components must be carefully evaluated.
ORDERING INFORMATION
Device
CF5019AL×–2
Package
Chip form
SEIKO NPC CORPORATION —1

PagesPages 12
Télécharger [ CF5019 ]


Fiche technique recommandé

No Description détaillée Fabricant
CF5010 Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits
CF5011 1.8V Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits
CF5012 Low-current Consumption Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits
CF5014 Crystal Oscillator Module ICs Nippon Precision Circuits
Nippon Precision Circuits

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche